Page 1 of 1

Clinker Formation

Posted: Fri. Mar. 29, 2024 9:50 pm
by Greenleaf
I'm not new to coal or clinkers but the question recently came up of the temperature of a home heating appliance. Obviously it's hot enough inside the fire box to cause formation of clinkers. AKA melted silica, iron etc etc .

I have read the temperature of the heating appliance should not exceed 700°F but nobody mentions what component(s) this warning is in reference to.

If the burning of coal within a home heater forms clinkers, at what temperature does clinker form?

If I place a steel fire tool into the firepot of my home heater, the 1/2" round steel will quickly reach 1,200°F thusly its obviously well over 1,000° inside the firepot/firebox.

We routinely heat our steel in the blacksmith shop to 2,500° with a coal fire but push a fair amount of air into it to achieve a 3,000° fire. Thusly the formation of clinker is a given.

Re: Clinker Formation

Posted: Wed. Apr. 10, 2024 8:37 am
by Rob R.
Greenleaf wrote: Fri. Mar. 29, 2024 9:50 pm I have read the temperature of the heating appliance should not exceed 700°F but nobody mentions what component(s) this warning is in reference to.
For a radiant stove that generally refers to the temperature of the stove body.