Help locating an ash door handle?
-
- New Member
- Posts: 16
- Joined: Thu. Jul. 02, 2020 8:06 pm
- Hand Fed Coal Stove: Warm Morning 617A
- Coal Size/Type: bagged nut anthracite, bulk lump and stove bituminous
- Other Heating: Natural Gas Furnace
I bought a Warm Morning 617A today. Long story short: The seller "helped" me break the ash door handle clean off of the stove. Where could I find a replacement?
- Hambden Bob
- Member
- Posts: 8691
- Joined: Mon. Jan. 04, 2010 10:54 am
- Hand Fed Coal Stove: Blower Model Coal Chubby 1982-Serial#0097
- Hot Air Coal Stoker Stove: Harman 1998 Magnum Stoker
- Coal Size/Type: Rice-A-Roni ! / Nut
- Other Heating: Pro-Pain Forced Air
Welcome,Van! Hang In There! Perhaps one of Our Fine Folks can help You.
-
- New Member
- Posts: 16
- Joined: Thu. Jul. 02, 2020 8:06 pm
- Hand Fed Coal Stove: Warm Morning 617A
- Coal Size/Type: bagged nut anthracite, bulk lump and stove bituminous
- Other Heating: Natural Gas Furnace
I know there's one out there. I meant to take photos of the new (to me) stove but it was too dark by the time we got it up on the truck.
- freetown fred
- Missed and Always Remembered
- Posts: 30264
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Good--take em now!!
- freetown fred
- Missed and Always Remembered
- Posts: 30264
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Gotta be some kind of draft control--can ya see it inside what moves when ya play with it.?
-
- New Member
- Posts: 16
- Joined: Thu. Jul. 02, 2020 8:06 pm
- Hand Fed Coal Stove: Warm Morning 617A
- Coal Size/Type: bagged nut anthracite, bulk lump and stove bituminous
- Other Heating: Natural Gas Furnace
Well....nobody seemed to have a handle or know where to get one...so I improvised! JB Weld really IS handy stuff!! I got started on the disassembly and painting before I remembered to take good "before" photos. Here is what I have: Warm Morning 617A
Attachments
Legend:
Download File
File Information
File Comment
Copy [BBcode] to Clipboard
- freetown fred
- Missed and Always Remembered
- Posts: 30264
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Nice on the pix V--yep--JB-weld & duct-tape are a mans best friend right after his dog!!! She's lookin REAL good.
-
- New Member
- Posts: 16
- Joined: Thu. Jul. 02, 2020 8:06 pm
- Hand Fed Coal Stove: Warm Morning 617A
- Coal Size/Type: bagged nut anthracite, bulk lump and stove bituminous
- Other Heating: Natural Gas Furnace
Well...she's in! Haven't burned any coal yet but am burning a wood fire tonight to cure the paint job. House is SMOKY!! I hate that "new paint" smell! Attached are some photos. I moved the Jotul 118 out by myself and brought the Warm Morning in with a dolly. The Jotul 8 in the bed of the truck is one of my next projects....
Attachments
Legend:
Download File
File Information
File Comment
Copy [BBcode] to Clipboard
- carlherrnstein
- Member
- Posts: 1558
- Joined: Tue. Feb. 07, 2012 8:49 am
- Hot Air Coal Stoker Stove: combustioneer model 77B
- Coal Size/Type: pea stoker/Ohio bituminous
Looks good, if that JB stuff fails braze it with the white flux coated brazing rod from TSC or your favorite store. I have fixed a lot of castings with that stuff it's about as strong as cast iron at room temperature. It does take a oxyfuel torch a plumbers torch is not gonna do it.