E F M 520 DF
Forum rules
ATTN Business owners: You may advertise your companies coal related products and services for free in this section of the forum. Use the "Contact Admin" link at the bottom of any page or send a private message to Richard S. to become a "Verified Business Rep" so you can start new topics here.
Also note you are encouraged to respond to topics started by other members in other forums about your business. You may also start topics in other forums about your products if they are informational. As an example if you are a manufacturer of coal boilers you may start a topic in the boiler section on how to service it.
ATTN Business owners: You may advertise your companies coal related products and services for free in this section of the forum. Use the "Contact Admin" link at the bottom of any page or send a private message to Richard S. to become a "Verified Business Rep" so you can start new topics here.
Also note you are encouraged to respond to topics started by other members in other forums about your business. You may also start topics in other forums about your products if they are informational. As an example if you are a manufacturer of coal boilers you may start a topic in the boiler section on how to service it.
-
- Verified Business Rep.
- Posts: 138
- Joined: Mon. Mar. 10, 2008 10:45 am
Just got a really nice 520 D F in the shop ,going to do a complete rebuild on it if anyone is interested contact SCRAPPER
-
- Member
- Posts: 21
- Joined: Fri. Dec. 07, 2018 11:19 am
- Stoker Coal Boiler: 1967 efm 520 round door
- Hand Fed Coal Stove: harman mark3
scrapper do you have any nice bases for a 520 , I also could use the bottom of the burn pot where the auger bushing goes in mine is worn through the bushing into the cast iron