dilly358
New Member
Posts: 15 Joined: Tue. Nov. 07, 2023 10:36 am
Post
by dilly358 » Wed. Nov. 08, 2023 2:07 pm
So strange named after planets
ShawnLiNy
Member
Posts: 637 Joined: Fri. Nov. 30, 2018 12:28 am
Hand Fed Coal Stove: Waterford
Coal Size/Type: Nut
Post
by ShawnLiNy » Wed. Nov. 08, 2023 3:27 pm
dilly358 wrote: ↑ Wed. Nov. 08, 2023 2:07 pm
So strange named after planets
looks like no parts are listed for this model , but look at the the parts lists from other models they likely used the same plates for whatever purpose
dilly358
New Member
Posts: 15 Joined: Tue. Nov. 07, 2023 10:36 am
Post
by dilly358 » Wed. Nov. 08, 2023 3:46 pm
Thanks since brand new never used is good should last years before need to find parts
dilly358
New Member
Posts: 15 Joined: Tue. Nov. 07, 2023 10:36 am
Post
by dilly358 » Wed. Nov. 08, 2023 3:46 pm
Coal is getting phased out soon too so I love heating with coal
dilly358
New Member
Posts: 15 Joined: Tue. Nov. 07, 2023 10:36 am
Post
by dilly358 » Wed. Nov. 08, 2023 4:51 pm
Also my dial on side goes up to 8 what is best setting
dilly358
New Member
Posts: 15 Joined: Tue. Nov. 07, 2023 10:36 am
Post
by dilly358 » Wed. Nov. 08, 2023 4:53 pm
Here's my dial
Attachments
Legend:
Download File
File Information
File Comment
Copy [BBcode] to Clipboard
franco b
Site Moderator
Posts: 11427 Joined: Wed. Nov. 05, 2008 5:11 pm
Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
Baseburners & Antiques: Glenwood Modern Oak 114
Coal Size/Type: nut and pea
Post
by franco b » Wed. Nov. 08, 2023 4:54 pm
dilly358 wrote: ↑ Wed. Nov. 08, 2023 4:51 pm
Also my dial on side goes up to 8 what is best setting
The best setting is when the air flap is closed or almost closed when the stove is at the temperature you want. Use a flashlight.
dilly358
New Member
Posts: 15 Joined: Tue. Nov. 07, 2023 10:36 am
Post
by dilly358 » Wed. Nov. 08, 2023 4:57 pm
Thanks the disc in where Ashland is on right side doesn't open much there's two holes on the round thing it only moves left to right a bit
dilly358
New Member
Posts: 15 Joined: Tue. Nov. 07, 2023 10:36 am
Post
by dilly358 » Wed. Nov. 08, 2023 4:58 pm
Doesn't open or move much with dial
Attachments
Legend:
Download File
File Information
File Comment
Copy [BBcode] to Clipboard
dilly358
New Member
Posts: 15 Joined: Tue. Nov. 07, 2023 10:36 am
Post
by dilly358 » Wed. Nov. 08, 2023 5:00 pm
Here it is just moves a little left or right maybe opens a hair
Attachments
Legend:
Download File
File Information
File Comment
Copy [BBcode] to Clipboard
franco b
Site Moderator
Posts: 11427 Joined: Wed. Nov. 05, 2008 5:11 pm
Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
Baseburners & Antiques: Glenwood Modern Oak 114
Coal Size/Type: nut and pea
Post
by franco b » Wed. Nov. 08, 2023 5:04 pm
It should be moving away from stove surface to open. With a cold stove it should be wide open.
dilly358
New Member
Posts: 15 Joined: Tue. Nov. 07, 2023 10:36 am
Post
by dilly358 » Wed. Nov. 08, 2023 5:08 pm
Yea only opens a hair or closes no matter how high or low on dial
franco b
Site Moderator
Posts: 11427 Joined: Wed. Nov. 05, 2008 5:11 pm
Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
Baseburners & Antiques: Glenwood Modern Oak 114
Coal Size/Type: nut and pea
Post
by franco b » Wed. Nov. 08, 2023 5:24 pm
dilly358 wrote: ↑ Wed. Nov. 08, 2023 5:08 pm
Yea only opens a hair or closes no matter how high or low on dial
I don't think it is working right. I would pull the dial and remove the plate to get at and observe the operation and adjust as needed.
dilly358
New Member
Posts: 15 Joined: Tue. Nov. 07, 2023 10:36 am
Post
by dilly358 » Fri. Nov. 10, 2023 9:47 am
Thanks so much for in put I spun the disk to the right a few spins from the bottom where Ashbin is now it opens and closes 8 is wide open and lower u go it closes
mwzad
New Member
Posts: 11 Joined: Sat. Oct. 07, 2017 11:44 am
Post
by mwzad » Sat. Feb. 17, 2024 11:27 am
dilly358 wrote: ↑ Fri. Nov. 10, 2023 9:47 am
Thanks so much for in put I spun the disk to the right a few spins from the bottom where Ashbin is now it opens and closes 8 is wide open and lower u go it closes
I sent you a pm on your haas sohn stove. Always good to talk to someone who is running the same unit!