HAAS+SOHN???

[dilly358]

So strange named after planets

[ShawnLiNy]

So strange named after planets

looks like no parts are listed for this model , but look at the the parts lists from other models they likely used the same plates for whatever purpose

[dilly358]

Thanks since brand new never used is good should last years before need to find parts

[dilly358]

Coal is getting phased out soon too so I love heating with coal

[dilly358]

Also my dial on side goes up to 8 what is best setting

[dilly358]

Here's my dial

[franco b]

Also my dial on side goes up to 8 what is best setting

The best setting is when the air flap is closed or almost closed when the stove is at the temperature you want. Use a flashlight.

[dilly358]

Thanks the disc in where Ashland is on right side doesn't open much there's two holes on the round thing it only moves left to right a bit

[dilly358]

Doesn't open or move much with dial

[dilly358]

Here it is just moves a little left or right maybe opens a hair

[franco b]

It should be moving away from stove surface to open. With a cold stove it should be wide open.

[dilly358]

Yea only opens a hair or closes no matter how high or low on dial

[franco b]

Yea only opens a hair or closes no matter how high or low on dial

I don't think it is working right. I would pull the dial and remove the plate to get at and observe the operation and adjust as needed.

[dilly358]

Thanks so much for in put I spun the disk to the right a few spins from the bottom where Ashbin is now it opens and closes 8 is wide open and lower u go it closes

[mwzad]

Thanks so much for in put I spun the disk to the right a few spins from the bottom where Ashbin is now it opens and closes 8 is wide open and lower u go it closes

I sent you a pm on your haas sohn stove. Always good to talk to someone who is running the same unit!