Help with LIner

Post Reply
 
Recker
New Member
Posts: 3
Joined: Mon. Oct. 31, 2022 2:02 pm
Hand Fed Coal Stove: Hitzer 983 and Hitzer 503
Coal Size/Type: Anthracite

Post by Recker » Mon. Oct. 31, 2022 2:10 pm

Hello,

I just somewhat installed a 35 Ft. double walled stainless steel liner down my chimney. The chimney has an offset about 8 ft from the floor in my basement. I was able to pull the liner through, however some of the liner was damaged from the offset and if you look inside the liner the inner "tab's are buckled. The rest of the liner is perfect. Anyway I can fix this problem? I do have some access to the damaged area and I was thinking about sliding a stove pipe up the liner to fix the damaged area and also to be able to connect to the top of my stove. Any ideas or suggestions would be greatly appreciated.

I ran the clay liner the past few years and no issues. It only because an issue when we renovated the first floor and the heatalator was removed and we then need a liner.

Thanks!

 
waytomany?s
Member
Posts: 3621
Joined: Fri. Aug. 16, 2019 3:02 pm
Location: Oneida, N.Y.
Hand Fed Coal Stove: Harmon Mark II
Hand Fed Coal Furnace: Looking
Baseburners & Antiques: Looking
Coal Size/Type: Nut
Other Heating: newmac wood/coal combo furnace

Post by waytomany?s » Mon. Oct. 31, 2022 4:13 pm

Tabs? Buckled? Are you saying there is a kink in the pipe? The ribs are dented? Is the liner cut open?

 
Recker
New Member
Posts: 3
Joined: Mon. Oct. 31, 2022 2:02 pm
Hand Fed Coal Stove: Hitzer 983 and Hitzer 503
Coal Size/Type: Anthracite

Post by Recker » Mon. Oct. 31, 2022 6:16 pm

The ribs are dented and there are a few openings in the pipe. More like slits where it came apart. There are no actually lacerations in the liner.

 
CapeCoaler
Member
Posts: 6515
Joined: Sun. Feb. 10, 2008 3:48 pm
Location: Cape Cod, MA
Stoker Coal Boiler: want AA130
Hand Fed Coal Stove: DS Machine BS#4, Harman MKII, Hitzer 503,...
Coal Size/Type: Pea/Nut/Stove

Post by CapeCoaler » Tue. Nov. 01, 2022 8:18 am

Just damage to the outside of the double wall liner...
Inner liner no damage...


 
Recker
New Member
Posts: 3
Joined: Mon. Oct. 31, 2022 2:02 pm
Hand Fed Coal Stove: Hitzer 983 and Hitzer 503
Coal Size/Type: Anthracite

Post by Recker » Tue. Nov. 01, 2022 5:55 pm

There is some damage inside where the inner ribs was pulled up. I would say some damage to the outside and inside.

 
waytomany?s
Member
Posts: 3621
Joined: Fri. Aug. 16, 2019 3:02 pm
Location: Oneida, N.Y.
Hand Fed Coal Stove: Harmon Mark II
Hand Fed Coal Furnace: Looking
Baseburners & Antiques: Looking
Coal Size/Type: Nut
Other Heating: newmac wood/coal combo furnace

Post by waytomany?s » Tue. Nov. 01, 2022 8:58 pm

What exactly was the reason for the liner? How far up the liner is the damage?

 
CapeCoaler
Member
Posts: 6515
Joined: Sun. Feb. 10, 2008 3:48 pm
Location: Cape Cod, MA
Stoker Coal Boiler: want AA130
Hand Fed Coal Stove: DS Machine BS#4, Harman MKII, Hitzer 503,...
Coal Size/Type: Pea/Nut/Stove

Post by CapeCoaler » Thu. Nov. 03, 2022 9:23 pm

if you can see daylight from the inside...
The liner will not function as intended...

Post Reply

Return to “Coal Bins, Chimneys, CO Detectors & Thermostats”