harman Mark 1
Friend of mine has a harman mark 1 stove. Having trouble with stove going out at night. Checked it out there are small holes in looks like the baffle. can u still get part or can I get plate of steel drill holes and screw on plate to baffle.
-
- Member
- Posts: 3941
- Joined: Fri. Aug. 16, 2019 3:02 pm
- Location: Oneida, N.Y.
- Hand Fed Coal Stove: Harmon Mark II
- Hand Fed Coal Furnace: Looking
- Baseburners & Antiques: Looking
- Coal Size/Type: Nut
- Other Heating: newmac wood/coal combo furnace
I wouldn't think that would cause it to go out. Transfer less heat, but not cause it to go out. Is the coal completely burnt in the front?
- oliver power
- Member
- Posts: 2970
- Joined: Sun. Apr. 16, 2006 9:28 am
- Location: Near Dansville, NY
- Stoker Coal Boiler: KEYSTOKER Kaa-2
- Hand Fed Coal Stove: Hitzer 50-93 & 30-95, Vigilant (pre-2310), D.S. 1600 Circulator, Hitzer 254
I'll second that!waytomany?s wrote: ↑Sun. Feb. 14, 2021 7:43 pmI wouldn't think that would cause it to go out. Transfer less heat, but not cause it to go out. Is the coal completely burnt in the front?
-
- New Member
- Posts: 8
- Joined: Thu. Feb. 18, 2021 2:45 pm
- Hand Fed Coal Stove: Harman/Legacy Mk II
- Coal Size/Type: Nut
- Other Heating: Joutl 108 wood stove
Had a MkI for over 10 years. Good heat, but will burn the full load of coal without a barometric damper during windy days. Need to feed it more often during high draw conditions.
.
.
-
- Member
- Posts: 3941
- Joined: Fri. Aug. 16, 2019 3:02 pm
- Location: Oneida, N.Y.
- Hand Fed Coal Stove: Harmon Mark II
- Hand Fed Coal Furnace: Looking
- Baseburners & Antiques: Looking
- Coal Size/Type: Nut
- Other Heating: newmac wood/coal combo furnace
Ever sort it out?
-
- Member
- Posts: 3941
- Joined: Fri. Aug. 16, 2019 3:02 pm
- Location: Oneida, N.Y.
- Hand Fed Coal Stove: Harmon Mark II
- Hand Fed Coal Furnace: Looking
- Baseburners & Antiques: Looking
- Coal Size/Type: Nut
- Other Heating: newmac wood/coal combo furnace
That'll definitely help.