Lifting/Moving boiler

 
User avatar
Richard S.
Mayor
Posts: 15183
Joined: Fri. Oct. 01, 2004 8:35 pm
Location: NEPA
Stoker Coal Boiler: Van Wert VA1200
Coal Size/Type: Buckwheat/Anthracite

Post by Richard S. » Wed. Jun. 12, 2019 5:15 am

I think you guys are getting a little crazy here, to quote my old wrestling coach "Give me enough leverage and I will move the world." I was moving the 1500 pound Van Wert around by myself.

Use the pallet jack to get it close to where you want it, roughly about 4 feet way. Use some large crow bars to bar it off the pallet onto some one inch pipes and roll it into position. Pipes are easily removed.... Once you have it sitting on the floor you should only need to do some small adjustments. If you have tractor that can take some of the weight getting it righ where you want it should be very easy step.

Just remember to keep your hands and fingers in the car at all times. ;)


 
coalder
Member
Posts: 1493
Joined: Mon. Dec. 16, 2013 1:48 pm
Location: somewhere high in the catskill mountains
Hand Fed Coal Boiler: harman sf 160
Coal Size/Type: Nut
Other Heating: wood parlor stove

Post by coalder » Wed. Jun. 12, 2019 9:28 am

Here is the way I placed my Harman boiler. Roll it in place on pallet jack. Take a 4x4 and 2 adjustable lally columns. Securely use columns to press 4x4 into ceiling. Use 4x4 to hoist boiler from pallet with chain hoist, & lower onto concrete bricks. Sand & patch the Sheetrock later. Don't overthink it.

 
Dave 1234
Member
Posts: 788
Joined: Tue. Nov. 13, 2012 9:05 am
Stoker Coal Boiler: 1948 International boiler, EFM S-20 stoker
Coal Size/Type: Buck,

Post by Dave 1234 » Wed. Jun. 12, 2019 1:58 pm

A good '' rigger'' will do this for you , and it will not cost much. They move huge machines every day.

A broken anything is expensive .

I move this sort of stuff , but old-timers gave me lots of tricks to stay out of harms way .

Dave

 
Pacowy
Member
Posts: 3555
Joined: Tue. Sep. 04, 2007 10:14 pm
Location: Dalton, MA
Stoker Coal Boiler: H.B. Smith 350 Mills boiler/EFM 85R stoker
Coal Size/Type: Buckwheat/anthracite

Post by Pacowy » Wed. Jun. 12, 2019 2:20 pm

Given that the OP stated the ceiling is 13' high, coalder's method doesn't seem very promising here. More generally, I'd be wary of relying on compression of drywall, or the strapping under it, as any kind of stabilizing element in the handling of an 850+ lb load. Better to use a pallet jack, engine hoist, Johnson bar, set of pipes, loader, etc. - almost anything that keeps the forces in play under reasonable control.

Mike

 
User avatar
nepacoal
Member
Posts: 1696
Joined: Wed. Nov. 21, 2012 7:49 am
Location: Coal Country
Stoker Coal Boiler: Keystoker KAA-4 / "Kelly" and an EFM 520 at my in-laws
Hand Fed Coal Boiler: Harman SF-260 - retired
Coal Size/Type: Buck

Post by nepacoal » Wed. Jun. 12, 2019 3:07 pm

AHS shows a pallet Jack lifting the unit through the ash doors... looks like 4x4's on top of arms to raise height

Attachments

handy-way-to-move-your-s130-260.jpg
.JPG | 39.1KB | handy-way-to-move-your-s130-260.jpg

 
Trumpeterb
Member
Posts: 229
Joined: Sun. Feb. 10, 2019 8:37 am
Location: West Middlesex, PA
Stoker Coal Boiler: AHS130 Coal Gun
Coal Size/Type: Pea
Other Heating: Electric baseboards (hopefully never use these again)

Post by Trumpeterb » Wed. Jun. 12, 2019 3:31 pm

nepacoal wrote:
Wed. Jun. 12, 2019 3:07 pm
AHS shows a pallet Jack lifting the unit through the ash doors... looks like 4x4's on top of arms to raise height

There it is! I will check in with them when I pick it up to make sure this is indeed ok, but assuming it is, this is the ticket!

 
User avatar
nepacoal
Member
Posts: 1696
Joined: Wed. Nov. 21, 2012 7:49 am
Location: Coal Country
Stoker Coal Boiler: Keystoker KAA-4 / "Kelly" and an EFM 520 at my in-laws
Hand Fed Coal Boiler: Harman SF-260 - retired
Coal Size/Type: Buck

Post by nepacoal » Wed. Jun. 12, 2019 4:02 pm

Trumpeterb wrote:
Wed. Jun. 12, 2019 3:31 pm
There it is! I will check in with them when I pick it up to make sure this is indeed ok, but assuming it is, this is the ticket!
That picture came from their website... good luck with the install.

https://www.alternateheatingsystems.com/coal-gun/ ... hotos.html


 
User avatar
oliver power
Member
Posts: 2970
Joined: Sun. Apr. 16, 2006 9:28 am
Location: Near Dansville, NY
Stoker Coal Boiler: KEYSTOKER Kaa-2
Hand Fed Coal Stove: Hitzer 50-93 & 30-95, Vigilant (pre-2310), D.S. 1600 Circulator, Hitzer 254

Post by oliver power » Wed. Jun. 12, 2019 9:31 pm

If you live near me, I have both, a single fork pallet jack, and an engine hoist. You are welcome to borrow either one. I used the engine hoist for my boiler. The single fork pallet jack I think would be better. I didn't have the pallet jack at the time of my installation. The engine hoist worked good.

https://www.bing.com/images/search?q=Single+Fork+ ... 129&ch=445

 
Trumpeterb
Member
Posts: 229
Joined: Sun. Feb. 10, 2019 8:37 am
Location: West Middlesex, PA
Stoker Coal Boiler: AHS130 Coal Gun
Coal Size/Type: Pea
Other Heating: Electric baseboards (hopefully never use these again)

Post by Trumpeterb » Wed. Jun. 12, 2019 10:17 pm

That is very generous of you. Thank you so much! It looks like we live a significant distance apart, assuming you are still on NY. My neighbor had a pallet jack, so we should be ok. Tomorrow is the day I believe!!

 
CapeCoaler
Member
Posts: 6515
Joined: Sun. Feb. 10, 2008 3:48 pm
Location: Cape Cod, MA
Stoker Coal Boiler: want AA130
Hand Fed Coal Stove: DS Machine BS#4, Harman MKII, Hitzer 503,...
Coal Size/Type: Pea/Nut/Stove

Post by CapeCoaler » Thu. Jun. 13, 2019 1:24 am

Pics...
Or it did not happen...
LOL...

 
User avatar
oliver power
Member
Posts: 2970
Joined: Sun. Apr. 16, 2006 9:28 am
Location: Near Dansville, NY
Stoker Coal Boiler: KEYSTOKER Kaa-2
Hand Fed Coal Stove: Hitzer 50-93 & 30-95, Vigilant (pre-2310), D.S. 1600 Circulator, Hitzer 254

Post by oliver power » Thu. Jun. 13, 2019 4:49 am

Hi Trumpeterb ,
Where do you live? You should fill in your profile so that we all know a little about you. Things like heating source, location, etc.. Other members may live near you.

 
Trumpeterb
Member
Posts: 229
Joined: Sun. Feb. 10, 2019 8:37 am
Location: West Middlesex, PA
Stoker Coal Boiler: AHS130 Coal Gun
Coal Size/Type: Pea
Other Heating: Electric baseboards (hopefully never use these again)

Post by Trumpeterb » Thu. Jun. 13, 2019 9:07 pm

oliver power wrote:
Thu. Jun. 13, 2019 4:49 am
Hi Trumpeterb ,
Where do you live? You should fill in your profile so that we all know a little about you. Things like heating source, location, etc.. Other members may live near you.

Updated! Just got back from AHS. 6 hours of driving later, I have a coal gun! It is a used model (2008 I believe), but it was never fired or installed. Sort of used/new. Anyway, got a decent deal on it because of that. It came with the belt drive fan which I guess was standard on the 2008s. Round hopper rather than square. Pretty cool looking unit. Tomorrow I unload it and start reading up on installation.

 
User avatar
plumberman
Member
Posts: 264
Joined: Sun. Apr. 14, 2013 2:45 am
Location: andes ny
Stoker Coal Boiler: coal gun 130
Coal Size/Type: pea
Other Heating: solar dhw/samsung mini split/oil

Post by plumberman » Sat. Jun. 15, 2019 6:38 am

think I used 4 bottle jacks 2 4x4's and some blocking. put in place on shipping pallet. took off ash doors, slid 4x,s thru front and back side of door opening.. just make shure you have enough jack out to lower to floor if not rest on 2xs then re pick. worked twice for me :D

 
User avatar
Scottscoaled
Member
Posts: 2812
Joined: Tue. Jan. 08, 2008 9:51 pm
Location: Malta N.Y.
Stoker Coal Boiler: EFM 520, 700, Van Wert 800 GJ 61,53
Baseburners & Antiques: Magic Stewart 16, times 2!
Coal Size/Type: Lots of buck
Other Heating: Slant Fin electric boiler backup

Post by Scottscoaled » Sat. Jun. 15, 2019 11:11 pm

Ok. This has gone on long enuf! Get three 12' 2x4's. Tie them together on one end. Open them above the boiler like a teepee. Use that for a lift point. Works real good. Rigged quite a few boilers out of basements like that. Worked on a VanWert 800 out of a set of bilco doors in Scranton one time. Used them to get boiler into the bed of a pickup too.

 
PolarLight
Member
Posts: 261
Joined: Fri. Apr. 06, 2018 5:07 pm
Stoker Coal Boiler: JB
Coal Size/Type: Nut
Other Heating: Propane, firewood

Post by PolarLight » Mon. Jun. 17, 2019 12:46 am

I used a car jack lifting up corners and hammering pallet out of boiler. Before I to so, I used a chain saw cutting pallet underneath. Then I put 2х4 blocks under each leg, jacked it up and replaced blocks with a snowmobile's rolls. Then started to roll very gently.
Then juck up again and finally remove snowmobile rolls......my boiler weights over 1500 and it did work.


Post Reply

Return to “Stoker Coal Boilers Using Anthracite (Hydronic & Steam)”