New coal bin

 
Symonds86
Member
Posts: 26
Joined: Tue. Feb. 12, 2019 2:19 pm
Location: Cny
Hot Air Coal Stoker Furnace: Key stoker koker heats shop
Coal Size/Type: Rice

Post by Symonds86 » Mon. Apr. 08, 2019 8:28 am

No problem about the pics thanks for the kind words all


 
Symonds86
Member
Posts: 26
Joined: Tue. Feb. 12, 2019 2:19 pm
Location: Cny
Hot Air Coal Stoker Furnace: Key stoker koker heats shop
Coal Size/Type: Rice

Post by Symonds86 » Mon. Apr. 08, 2019 8:32 pm

Finally listened to those of you who suggested a system that could regulate the coal and installed it today after work. I Had The jack so used that to move the plates. I want to try to hook a cheap 110v winch motor to the jack so I can open and close it fron inside. Also added steps, a smart man would have done that in the beginning of the project.

Attachments

20190408_200115.jpg
.JPG | 251KB | 20190408_200115.jpg
20190408_200056.jpg
.JPG | 254.7KB | 20190408_200056.jpg
20190408_195942.jpg
.JPG | 279.2KB | 20190408_195942.jpg
20190408_195922.jpg
.JPG | 245.1KB | 20190408_195922.jpg
20190408_200032.jpg
.JPG | 277KB | 20190408_200032.jpg

 
User avatar
swyman
Member
Posts: 2355
Joined: Mon. Apr. 13, 2015 9:50 pm
Location: Blissfield, MI
Stoker Coal Boiler: Axeman-Anderson 260M Leisure Line AA-220 Boiler (FOR SALE)
Coal Size/Type: Lehigh Pea

Post by swyman » Tue. Apr. 09, 2019 8:14 am

Nice work, love threads like these!

 
Symonds86
Member
Posts: 26
Joined: Tue. Feb. 12, 2019 2:19 pm
Location: Cny
Hot Air Coal Stoker Furnace: Key stoker koker heats shop
Coal Size/Type: Rice

Post by Symonds86 » Sat. Apr. 13, 2019 4:22 pm

20190413_121310.jpg
.JPG | 313.5KB | 20190413_121310.jpg
20190413_121317.jpg
.JPG | 228.1KB | 20190413_121317.jpg
Git some more work done today. Mounted winch. To power flow control doors. Also got it painted

Attachments

20190413_135609.jpg
.JPG | 443.1KB | 20190413_135609.jpg
20190413_135634.jpg
.JPG | 484.6KB | 20190413_135634.jpg

 
CapeCoaler
Member
Posts: 6515
Joined: Sun. Feb. 10, 2008 3:48 pm
Location: Cape Cod, MA
Stoker Coal Boiler: want AA130
Hand Fed Coal Stove: DS Machine BS#4, Harman MKII, Hitzer 503,...
Coal Size/Type: Pea/Nut/Stove

Post by CapeCoaler » Sat. Apr. 13, 2019 9:59 pm

Very Mad Max...

 
Symonds86
Member
Posts: 26
Joined: Tue. Feb. 12, 2019 2:19 pm
Location: Cny
Hot Air Coal Stoker Furnace: Key stoker koker heats shop
Coal Size/Type: Rice

Post by Symonds86 » Sun. Apr. 14, 2019 1:26 pm

Got the thing completely assembled today, just have to get some different tires on it. Also got it put in the lean too where it is going to live. The pick of the window is the back of the lean to an auger will move the coal to the window and gravity should hopefully drop into the hopper though a piece of pvc. I will have to find a new place to store the wood splitter now or just convince the wife to swap out the wood srove in the house for coal also.

Attachments

20190414_115808.jpg
.JPG | 713.7KB | 20190414_115808.jpg
20190414_124240.jpg
.JPG | 245.2KB | 20190414_124240.jpg
20190414_124210.jpg
.JPG | 273.5KB | 20190414_124210.jpg

 
CapeCoaler
Member
Posts: 6515
Joined: Sun. Feb. 10, 2008 3:48 pm
Location: Cape Cod, MA
Stoker Coal Boiler: want AA130
Hand Fed Coal Stove: DS Machine BS#4, Harman MKII, Hitzer 503,...
Coal Size/Type: Pea/Nut/Stove

Post by CapeCoaler » Sun. Apr. 14, 2019 3:16 pm

Sell the wood splitter and buy a coal stove...
Looks good...


 
Symonds86
Member
Posts: 26
Joined: Tue. Feb. 12, 2019 2:19 pm
Location: Cny
Hot Air Coal Stoker Furnace: Key stoker koker heats shop
Coal Size/Type: Rice

Post by Symonds86 » Sun. Apr. 14, 2019 3:54 pm

I like the way you think

 
User avatar
oliver power
Member
Posts: 2970
Joined: Sun. Apr. 16, 2006 9:28 am
Location: Near Dansville, NY
Stoker Coal Boiler: KEYSTOKER Kaa-2
Hand Fed Coal Stove: Hitzer 50-93 & 30-95, Vigilant (pre-2310), D.S. 1600 Circulator, Hitzer 254

Post by oliver power » Sun. Jun. 02, 2019 8:53 pm

You should coat the inside with paint, roof coating, or something. Otherwise the bottom will rot out. If mine, I would paint the inside to separate the metals. Them pop rivet, or glue the aluminum down. Or cover the bottom with luan plywood. Then staple tyvek house wrap to it for slipperiness. You get the idea. If you do nothing, it will rot out if used as storage bin. After numerous repairs, I finally covered the bottom of mine with aluminum. No more rot. You did paint!!! Guess I should have read ALL the replies before posting my own... :)

 
Symonds86
Member
Posts: 26
Joined: Tue. Feb. 12, 2019 2:19 pm
Location: Cny
Hot Air Coal Stoker Furnace: Key stoker koker heats shop
Coal Size/Type: Rice

Post by Symonds86 » Wed. Jul. 03, 2019 8:23 am

I painted it inside and out and the bottom foot was skinned with stainless I will have to look at it after a year of use and see if it need more protection inside. I have gotten all the electric parts I need and have need digging out the bank next to the garage so I can build amother small lean to to park it under keeping it out of the way and giving me the room back where it's parked now. This should also give me a clear run for the auger to go from then bin tk the garage, we'll at least in my head it looks good.

 
FirstcoalstokerRon
Member
Posts: 438
Joined: Wed. Dec. 07, 2016 3:57 pm
Location: north west of Pitts Pa.
Stoker Coal Boiler: AHS S-130
Coal Size/Type: pea/anthracite

Post by FirstcoalstokerRon » Tue. Sep. 21, 2021 11:56 am

I know its been along time but I just got a grain wagon like yours and would love any info you or your friends can give me

 
FirstcoalstokerRon
Member
Posts: 438
Joined: Wed. Dec. 07, 2016 3:57 pm
Location: north west of Pitts Pa.
Stoker Coal Boiler: AHS S-130
Coal Size/Type: pea/anthracite

Post by FirstcoalstokerRon » Sun. Dec. 12, 2021 11:00 am

I know it's been a long time since I have talked to all of you and it is because I have been in and out of the hospital most of the summer, I am back with only 9 toes due to an infection in my foot, but I am back.
Due to my health problems and the infection in my foot I have not got much done on my auger systems or my coal bins. I am still working on the auger systems that will get my pea coal from my trailer in the alley behind my house into my outside coal bin about 50 feet away. I am thinking of using a flex auger for that. I have a 6 inch grain auger in the bottom of the outside bin into the inside bin and I do have an AHS automatic 6 inch auger that augers the pea coal from my inside coal bin into the hopper of my S-130 boiler. Most of you know I stripped out the sensor on the automatic auger and since then we, meaning my wife and I mostly her have been using it on manual only and as we must empty the ashes every 2 or 3 days, we run the auger at the same time as we remove the ashes. The boiler is working great and our house is very warm. I did get a grain wagon something like the one Symonds86 has and would love any info and/or advice any of you can give me on fixing it up to auger pea coal. I know I will never get mine looking as good as he did his. I am also searching COALPAIL for ideas. My first question is there any reason the augers on the grain wagon won't handle pea size coal? I am planning to strap it down on my tandem axle trailer as my trailer has license plates, brakes and lights. I will unload the wagon with its two augers into a 3 x 3 x 5 foot box inside my fence. From there I have a 5 inch flex auger that will move it into my outside bin. No lifting or carrying, just push some buttons. I HOPE!!!
Any advice and/or suggestions you have will be greatly apricated, please tell me if you think my ideas will work or not.
As it will be spring before I can work on all this stuff as most of it is outside, I will have lots of time to look stuff up and take advice from all of you.
AGAIN, I SAY THANKS FOR ALL OF THE HELP YOU ALL HAVE GIVEN ME IN THE PAST AND ANY YOU WILL GIVE ME IN THE FUTURE!!! THANKS SO MUCH!!
BTW I DO LOVE WORKING ON MY BOILER AND ALL OF THE THINGS THAT GO WITH IT!!!!
[/quote]

Attachments

thumbnail_Resized_20210918_164221.jpg
.JPG | 39.4KB | thumbnail_Resized_20210918_164221.jpg
thumbnail_Resized_20210918_164237.jpg
.JPG | 34.5KB | thumbnail_Resized_20210918_164237.jpg
thumbnail_Resized_20210918_164407.jpg
.JPG | 95.9KB | thumbnail_Resized_20210918_164407.jpg
thumbnail_Resized_20210918_164715.jpg
.JPG | 73.8KB | thumbnail_Resized_20210918_164715.jpg
thumbnail_Resized_20210918_164739.jpg
.JPG | 55.8KB | thumbnail_Resized_20210918_164739.jpg
Last edited by FirstcoalstokerRon on Sun. Dec. 12, 2021 2:39 pm, edited 1 time in total.

 
FirstcoalstokerRon
Member
Posts: 438
Joined: Wed. Dec. 07, 2016 3:57 pm
Location: north west of Pitts Pa.
Stoker Coal Boiler: AHS S-130
Coal Size/Type: pea/anthracite

Post by FirstcoalstokerRon » Sun. Dec. 12, 2021 11:35 am

Sorry I wanted to post this in COAL GUN S-130 INSTALL. Not sure what i did wrong or how to change it.



















-

 
FirstcoalstokerRon
Member
Posts: 438
Joined: Wed. Dec. 07, 2016 3:57 pm
Location: north west of Pitts Pa.
Stoker Coal Boiler: AHS S-130
Coal Size/Type: pea/anthracite

Post by FirstcoalstokerRon » Thu. Dec. 16, 2021 6:57 pm

I intended to post this in COAL GUN S-130 install but it posted in NEW COAL BIN by Symonds86 instead. I have no idea what i did wrong nor do i know how to fix it. I will try reposting it in COAL GUN S-130 install.
I know it's been a long time since I have talked to all of you and it is because I have been in and out of the hospital most of the summer, I am back with only 9 toes due to an infection in my foot, but I am back.
Due to my health problems and the infection, I have not got much done on my auger systems or my coal bins in the past year. I do hope i can get more done by this time next year, but i do need help.
I did get a grain wagon something like the one Symonds86 has, just one more thing I must try to finish and would love any info and/or advice any of you can give me on fixing it up to auger pea coal. I know I will never get mine looking as good as his but I will try. I am also searching COALPAIL for ideas and/or advice.
My first question is there any reason the augers on the grain wagon won't handle pea size coal?
I am planning to strap it down on my tandem axle trailer as my trailer has license plates, brakes and lights. I will unload the wagon from in the alley with its two augers into a 3ft x 3ft x 5ft high box just inside my fence. From there I have a flex auger that will move it into my outside bin about 50ft away. I have a 14ft x 6 inch grain auger in the bottom of the outside bin that will move the coal into the inside 21/2 x 2 1/2 x 4ft coal box and I do have an AHS automatic 6 inch auger that augers the pea coal from my inside coal box into the hopper of my S-130 boiler. No lifting or carrying, just push some buttons. I HOPE!!!
Most of you know I stripped out the sensor on the automatic auger and since then we, meaning my wife and I mostly her have been using it on manual only and as we must empty the ashes every 2 or 3 days, we run the auger at the same time as we remove the ashes. The boiler is working great and our house is very warm.
Any advice and/or suggestions you give me will be greatly apricated, please tell me if you think my ideas will work or not.
As it will be spring before I can work on all this stuff as most of it is outside, I will have lots of time to look stuff up and search COALPAIL for ideas and advice and from all of you.
AGAIN, I SAY THANKS FOR ALL OF THE HELP YOU ALL HAVE GIVEN ME IN THE PAST AND ANY YOU WILL GIVE ME IN THE FUTURE!!! THANKS SO MUCH!!
BTW I DO LOVE WORKING ON MY BOILER AND ALL OF THE THINGS THAT GO WITH IT!!!

 
FirstcoalstokerRon
Member
Posts: 438
Joined: Wed. Dec. 07, 2016 3:57 pm
Location: north west of Pitts Pa.
Stoker Coal Boiler: AHS S-130
Coal Size/Type: pea/anthracite

Post by FirstcoalstokerRon » Thu. Dec. 16, 2021 7:05 pm

LOOKS LIKE I SENT IT WRONG AGAIN NOT SURE WHAT I AM DOING WRONG AND I AM SORRY


Post Reply

Return to “Coal Bins, Chimneys, CO Detectors & Thermostats”