Coal Vac - more fine tuning!

 
User avatar
swyman
Member
Posts: 2355
Joined: Mon. Apr. 13, 2015 9:50 pm
Location: Blissfield, MI
Stoker Coal Boiler: Axeman-Anderson 260M Leisure Line AA-220 Boiler (FOR SALE)
Coal Size/Type: Lehigh Pea

Post by swyman » Tue. Nov. 27, 2018 5:41 pm

nepacoal wrote:
Tue. Nov. 27, 2018 5:39 pm
Not sure what you are asking, but heating the PVC this way gives a very tight fit. No leaks at all...
Just meaning does the dust separate when the coal flies into the barrel? I was thinking possibly of setting it up like the shop vac, putting a tab for the debris to hit as soon as it gets inside to make like a splash?

 
User avatar
nepacoal
Member
Posts: 1696
Joined: Wed. Nov. 21, 2012 7:49 am
Location: Coal Country
Stoker Coal Boiler: Keystoker KAA-4 / "Kelly" and an EFM 520 at my in-laws
Hand Fed Coal Boiler: Harman SF-260 - retired
Coal Size/Type: Buck

Post by nepacoal » Tue. Nov. 27, 2018 5:45 pm

swyman wrote:
Tue. Nov. 27, 2018 5:41 pm
Just meaning does the dust separate when the coal flies into the barrel? I was thinking possibly of setting it up like the shop vac, putting a tab for the debris to hit as soon as it gets inside to make like a splash?
Oh... Yes, I have very, very little dust in the coal going to the hopper and barrel but the dust deputy gets filled up twice a year and I use 3 or 4 filter bags each year.

 
User avatar
swyman
Member
Posts: 2355
Joined: Mon. Apr. 13, 2015 9:50 pm
Location: Blissfield, MI
Stoker Coal Boiler: Axeman-Anderson 260M Leisure Line AA-220 Boiler (FOR SALE)
Coal Size/Type: Lehigh Pea

Post by swyman » Tue. Nov. 27, 2018 8:16 pm

nepacoal wrote:
Tue. Nov. 27, 2018 5:45 pm
Oh... Yes, I have very, very little dust in the coal going to the hopper and barrel but the dust deputy gets filled up twice a year and I use 3 or 4 filter bags each year.
Hmmmm, i was going to try without the bags.....should I just install them?


 
User avatar
nepacoal
Member
Posts: 1696
Joined: Wed. Nov. 21, 2012 7:49 am
Location: Coal Country
Stoker Coal Boiler: Keystoker KAA-4 / "Kelly" and an EFM 520 at my in-laws
Hand Fed Coal Boiler: Harman SF-260 - retired
Coal Size/Type: Buck

Post by nepacoal » Tue. Nov. 27, 2018 8:25 pm

Start out with the bags and see how it goes... Mine turn black pretty quick and are good for up to 2 tons vacuumed up.

 
User avatar
McGiever
Member
Posts: 10130
Joined: Sun. May. 02, 2010 11:26 pm
Location: Junction of PA-OH-WV
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Hand Fed Coal Boiler: BUCKET A DAY water heater
Hand Fed Coal Stove: Warm Morning 414A
Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
Other Heating: Ground Source Heat Pump and some Solar

Post by McGiever » Tue. Nov. 27, 2018 8:42 pm

Kungur wrote:
Tue. Nov. 27, 2018 4:03 pm
Now I have a question. I thought I read that if I did that both vacs have to be identical. Is this correct? Also would I just use a "y" fitting?
Identical vacs is when to use "series"... "paralleled" is not as fussy, use what ya got.

 
Dirty Steve
Member
Posts: 247
Joined: Fri. Jun. 18, 2010 8:57 am
Location: Finger Lakes Region, NYS
Stoker Coal Boiler: Keystoker KA-6
Coal Size/Type: Rice
Other Heating: Oil- Off line

Post by Dirty Steve » Tue. Dec. 04, 2018 10:35 am

20151202_123210.jpg
.JPG | 447.5KB | 20151202_123210.jpg
Kungur wrote:
Tue. Nov. 27, 2018 2:19 pm
Hey a question!! I have a Dust Deputy but before buying a second one have any of you coal Vac guys made one?
Did it. Works. Not really worth the time, honestly. You get a bunch of extra pieces in the Dust Deputy kit. The lid and extra hose are very helpful. The black Home Cheapo lid has now cracked and I have to keep the cracks plugged or lose suction. Have to run two homer buckets stacked together on the home made Dust collector otherwise it will implode one Homer bucket.

For filters in the shop vacs I run a HEPA filter in each one. Then I run the paper collection bag attached to the inlet. I bought all Craftsman stuff originally. Now ALL Sears stores in my area are gone. :what:


 
User avatar
McGiever
Member
Posts: 10130
Joined: Sun. May. 02, 2010 11:26 pm
Location: Junction of PA-OH-WV
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Hand Fed Coal Boiler: BUCKET A DAY water heater
Hand Fed Coal Stove: Warm Morning 414A
Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
Other Heating: Ground Source Heat Pump and some Solar

Post by McGiever » Tue. Dec. 04, 2018 12:57 pm

Dirty Steve wrote:
Tue. Dec. 04, 2018 10:35 am
I bought all Craftsman stuff originally. Now ALL Sears stores in my area are gone. :what:
Lowes has picked up the Sears Craftsman tool line. :)

 
Kungur
Member
Posts: 723
Joined: Thu. Sep. 25, 2008 7:09 am
Location: Chardon,Ohio

Post by Kungur » Tue. Dec. 04, 2018 5:20 pm

I bought the "y" but have not yet installed it.

 
Kungur
Member
Posts: 723
Joined: Thu. Sep. 25, 2008 7:09 am
Location: Chardon,Ohio

Post by Kungur » Wed. Dec. 12, 2018 7:54 am

I really need to plumb the "y" in! Maybe today. But yesterday I added a new Rigid 6hp vac . Home Depot had a sale and it came with filter bags which I have never used. So after cleaning up my Dust Deputy I hooked this vac up to it. Curious to see how much coal dust it traps.
The reason for a new vac is I had taken the other Craftsman one from my woodworking shop so I have been without one for clean up.
But I must say it is much easier to fill the hopper and it is kinda fun!

Post Reply

Return to “Coal Bins, Chimneys, CO Detectors & Thermostats”