Favorite 416 Baseburner project

 
Paned
Member
Posts: 177
Joined: Wed. Mar. 25, 2015 10:37 am
Location: Ohio
Baseburners & Antiques: Florence 153, 151; Imperial Acorn, Alert Acorn, Acme Carbon, Favorite 261, Favorite 416, Estate Square Oak

Post by Paned » Sat. Mar. 03, 2018 9:36 am

Mac

Your missing back cover something like this. Those vent holes take cold air from floor up the stove and vents out top double heater pipe. My back cover looks like this. Yours maybe different.

Attachments

AE022FA6-099F-4141-AC0C-99EBE577E392.jpeg
.JPEG | 1.1MB | AE022FA6-099F-4141-AC0C-99EBE577E392.jpeg

 
Paned
Member
Posts: 177
Joined: Wed. Mar. 25, 2015 10:37 am
Location: Ohio
Baseburners & Antiques: Florence 153, 151; Imperial Acorn, Alert Acorn, Acme Carbon, Favorite 261, Favorite 416, Estate Square Oak

Post by Paned » Sat. Mar. 03, 2018 9:39 am

Getting some parts sorted out.

Attachments


 
User avatar
Pauliewog
Member
Posts: 1824
Joined: Mon. Dec. 02, 2013 12:15 am
Location: Pittston, Pennsylvania
Hot Air Coal Stoker Furnace: Alaska 140 Dual Paddle Feed
Baseburners & Antiques: Fame Rosemont #20, Home Stove Works #25, Glenwood #6, Happy Thought Oak, Merry Bride #214, Sunnyside, Worlds Argand #114, New Golden Sun , & About 30 others.
Coal Size/Type: Stove, Chesnut, Pea, Rice / Anthracite

Post by Pauliewog » Sat. Mar. 03, 2018 1:04 pm

McGiever wrote:
Fri. Mar. 02, 2018 11:39 pm
I have open holes to either side of the flue outlet...is that missing something?
Larry, The bonnet on mine covers the two duct holes on either side of the tea kettle lid and becomes part of the ductwork feeding the double heater outlet.

Paulie


 
User avatar
McGiever
Member
Posts: 10130
Joined: Sun. May. 02, 2010 11:26 pm
Location: Junction of PA-OH-WV
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Hand Fed Coal Boiler: BUCKET A DAY water heater
Hand Fed Coal Stove: Warm Morning 414A
Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
Other Heating: Ground Source Heat Pump and some Solar

Post by McGiever » Sat. Mar. 03, 2018 4:47 pm

Pauliewog wrote:
Sat. Mar. 03, 2018 1:04 pm
Larry, The bonnet on mine covers the two duct holes on either side of the tea kettle lid and becomes part of the ductwork feeding the double heater outlet.

Paulie
Yeah Paulie, Okay. That makes perfect sense...I notice *Paned* had the double heater outlet as part of his #415 bonnet there.

I'm still confused as that piece *Paned* showed above didn't seem to show the provisions to carry the 2 risers up into the 1 outlet double heater outlet with the bonnet, I think??? But then again, maybe it does/can???

Anyways it will all unfold as he progresses on to the assemble portion. :)

EDIT: I came across this photo that looks like it shows how things would fit, if I can get the reflector and the half circle ducting.
FAVORITE NO.60_7.JPG
.JPG | 273.2KB | FAVORITE NO.60_7.JPG

 
Paned
Member
Posts: 177
Joined: Wed. Mar. 25, 2015 10:37 am
Location: Ohio
Baseburners & Antiques: Florence 153, 151; Imperial Acorn, Alert Acorn, Acme Carbon, Favorite 261, Favorite 416, Estate Square Oak

Post by Paned » Sat. Mar. 03, 2018 7:14 pm

It creates a passage between the bonnet and inner stove which draws air up from floor. Here is a best pic I could get from the 261 showing the inside of the back of stove feeding the double heater vent. Those 2 vent holes you showed just feed into the space created by the cover and bonnet . The other picture is how that piece fits on the 416 bonnet. Hope this helps.

Attachments

D93E436B-BBC4-4842-819C-2F5893100B81.jpeg
.JPEG | 832KB | D93E436B-BBC4-4842-819C-2F5893100B81.jpeg

 
User avatar
McGiever
Member
Posts: 10130
Joined: Sun. May. 02, 2010 11:26 pm
Location: Junction of PA-OH-WV
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Hand Fed Coal Boiler: BUCKET A DAY water heater
Hand Fed Coal Stove: Warm Morning 414A
Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
Other Heating: Ground Source Heat Pump and some Solar

Post by McGiever » Mon. Mar. 12, 2018 1:14 pm

Okay, I understand what is going on and what parts it takes now. Thanks Guys! :yes:


 
Paned
Member
Posts: 177
Joined: Wed. Mar. 25, 2015 10:37 am
Location: Ohio
Baseburners & Antiques: Florence 153, 151; Imperial Acorn, Alert Acorn, Acme Carbon, Favorite 261, Favorite 416, Estate Square Oak

Post by Paned » Fri. Apr. 06, 2018 10:55 am

Making some progress. Cat waiting on heat from the fire pot.

Attachments

5DE9384B-7EAD-4D23-A1F9-F599392451C4.jpeg
.JPEG | 1MB | 5DE9384B-7EAD-4D23-A1F9-F599392451C4.jpeg

 
User avatar
Sunny Boy
Member
Posts: 25554
Joined: Mon. Nov. 11, 2013 1:40 pm
Location: Central NY
Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
Coal Size/Type: Nuts !
Other Heating: Oil &electric plenum furnace

Post by Sunny Boy » Fri. Apr. 06, 2018 3:48 pm

Smart cat!!! Knows a great stove when it sees one. ;)

It's looking really good, P.

Paul

 
User avatar
joeq
Member
Posts: 5739
Joined: Sat. Feb. 11, 2012 11:53 am
Location: Northern CT
Hand Fed Coal Stove: G111, Southard Robertson

Post by joeq » Fri. Apr. 06, 2018 6:40 pm

I like how in the 2nd pic, you have the suns rays shining through. Keep up the nice work. :yes:

Post Reply

Return to “Antiques, Baseburners, Kitchen Stoves, Restorations & Modern Reproductions”