hi fellas!

Post Reply
 
User avatar
Sylvesterd101
Member
Posts: 257
Joined: Tue. Sep. 11, 2018 10:46 pm
Location: Lehighton PA
Hand Fed Coal Boiler: Harman SF260
Coal Size/Type: nut, anthracite

Post by Sylvesterd101 » Sat. Sep. 19, 2020 11:08 am

Here in northeast Pennsylvania it got down to the low 40s it's been about six or seven months since I've been on the forum in that time my old lady left me and I only have my kid every 5 days so I'm going to be holding back starting the boiler right away since half the time it was the old lady that wanted it cuz she was cold. Just wanted to see if there was anybody in my area that got the itch to start burning 😊


 
RT Hauling
Member
Posts: 38
Joined: Thu. Sep. 15, 2016 7:24 am
Location: Coal Township Pa
Hot Air Coal Stoker Furnace: alaska stoker II
Hand Fed Coal Stove: florin foundry 810
Coal Size/Type: rice and pea

Post by RT Hauling » Sun. Sep. 20, 2020 5:30 am

Got my stoker fired up. It's in the thirties with a frost advisory here in Coal Township,Pa. Thirties at night that is, cold enough to make it uncomfortable in the morning without the stoker going.

Post Reply

Return to “Hand Fired Coal Boilers Using Anthracite”