Wood Coal Boiler Questions

Post Reply
 
User avatar
Merc300d
Member
Posts: 506
Joined: Tue. Feb. 18, 2014 7:45 pm
Location: Charleston SC
Hand Fed Coal Stove: Glenwood 6 base heater
Baseburners & Antiques: Too many
Coal Size/Type: Nut
Other Heating: Oil base board

Post by Merc300d » Wed. Jan. 21, 2015 8:52 pm

Hi fellow coal burners. I've had a wood coal boiler in my basement since I bought my house. It's hooked up in line with my oil fired boiler. I've never used it as it seems it was over fired and blew the thermostat. It needs gaskets and a good look over. Both boilers are piped into the same flue. They are piped in one over the other with the coal boiler on top. It was a legal setup years ago in 1985 when it was installed. Could I power vent the oil boiler out the storm window obviously with a proper precautions and keep the coal boiler in the same spot into my chimney ? Any thoughts or ideas will be greatly appreciated. Thanks

 
User avatar
Merc300d
Member
Posts: 506
Joined: Tue. Feb. 18, 2014 7:45 pm
Location: Charleston SC
Hand Fed Coal Stove: Glenwood 6 base heater
Baseburners & Antiques: Too many
Coal Size/Type: Nut
Other Heating: Oil base board

Post by Merc300d » Wed. Jan. 21, 2015 9:00 pm

image.jpg
.JPG | 107KB | image.jpg
image.jpg
.JPG | 129.8KB | image.jpg
Here's some pics..... Any experts
image.jpg
.JPG | 148.1KB | image.jpg
in the southeastern ma area.

 
lzaharis
Member
Posts: 2365
Joined: Sun. Mar. 25, 2007 8:41 pm
Location: Ithaca, New York
Stoker Coal Boiler: Keystoker KAA-4-1 dual fuel boiler
Hand Fed Coal Boiler: former switzer CWW100-sold
Coal Size/Type: rice
Other Heating: kerosene for dual fuel Keystoker/unused

Post by lzaharis » Wed. Jan. 21, 2015 11:32 pm

Greetings,

By the looks of things you have an HS Tarm Wood and Coal Boiler there by
the looks of things with a manual aquastat/thermostat and it is as rare as hens teeth.

Venting through the basement window is a no no with the national
plumbing code.

I would call HS Tarm and see about getting parts for it as it is a good boiler
and find out who is servicing them as all you need is parts and a plumber
to check it.

Where is the temperature balancing pump between the two boilers???????
I do not see one in your photo image. you should have one pump for the
zone(or zones) and a second for the temperature balancing function between the
boilers.

I see one pump-A B+G I think and a black painted pump coming off the oil boiler above
the burner-are those the only circulating pumps for the system or is the temperature
balancing pump hidden? please post more pictures when you have time.

I do not see a bladder tank, air scoop or air vents for hot water expansion and removal of air bubbles.
Is there an air scoop in the system with an automatic air vent?

You could sell both boilers and install a dual fuel coal stoker which is what I intend
on doing when the next heating season comes and solve the flue problem as a
dual fuel unit is permitted per code with one chimney.

Please post more pictures please.


 
User avatar
Merc300d
Member
Posts: 506
Joined: Tue. Feb. 18, 2014 7:45 pm
Location: Charleston SC
Hand Fed Coal Stove: Glenwood 6 base heater
Baseburners & Antiques: Too many
Coal Size/Type: Nut
Other Heating: Oil base board

Post by Merc300d » Thu. Jan. 22, 2015 4:21 am

Thanks for the response and input. I'm not really sure on the questions your asking. I will take more pics later today.

 
User avatar
windyhill4.2
Member
Posts: 6072
Joined: Fri. Nov. 22, 2013 2:17 pm
Location: Jonestown,Pa.17038
Stoker Coal Boiler: 1960 EFM520 installed in truck box
Hand Fed Coal Stove: Crane 404 with variable blower
Coal Size/Type: 404-nut, 520 rice ,anthracite for both

Post by windyhill4.2 » Thu. Jan. 22, 2015 6:47 am

Power vents are put thru walls all the time,There is no reason you can't run a power vent thru a closed up window hole,providing it is done to proper specs.

 
User avatar
coaledsweat
Site Moderator
Posts: 13763
Joined: Fri. Oct. 27, 2006 2:05 pm
Location: Guilford, Connecticut
Stoker Coal Boiler: Axeman Anderson 260M
Coal Size/Type: Pea

Post by coaledsweat » Thu. Jan. 22, 2015 8:56 am

The stovepipe appears to be plumbed ok by Burnham's recommendations. Just check it to make sure it isn't rotted out. Poke around with an ice pick to make sure. If all is good, fire it up. I would not power vent a hand fired unit.
The boilers appear to be plumbed parallel, no need to balance anything.

Post Reply

Return to “Hand Fired Coal Boilers Using Anthracite”