Where can I get parts for an old HS Tarm 303? I need the door gasket and the gasket (sheet) for the clean out opening on top of the unit leading to the flue.
Thank you,
HS Tarm 303 Parts
-
steamup
- Member
- Posts: 1209
- Joined: Fri. Oct. 03, 2008 12:13 pm
- Location: Napoli, NY
- Stoker Coal Boiler: Axeman-Anderson AA-130, Keystoker K-6
- Hand Fed Coal Boiler: HS Tarm 502 Wood/Coal/Oil
- Coal Size/Type: pea, buck, rice
Bioheat USA has the HS Tarm line
**Broken Link(s) Removed**They should be able to help you with parts.
**Broken Link(s) Removed**They should be able to help you with parts.
-
natalie
- New Member
- Posts: 11
- Joined: Fri. Jan. 21, 2011 6:31 pm
- Location: Philly PA
- Hand Fed Coal Boiler: HS Tarm 303
- Coal Size/Type: Nut
this post might be dead, but just incase it helps someone.
I used the High Temp Red RTV from Permatex, caulking tube size, when I was re-building my HS Tarm 303.
my thoughts: the boiler jacket (which the ash and coal fill doors are bolted to) will never exceed 200 deg in hot water mode, and the RTV is rated 600 deg.
I used the High Temp Red RTV from Permatex, caulking tube size, when I was re-building my HS Tarm 303.
my thoughts: the boiler jacket (which the ash and coal fill doors are bolted to) will never exceed 200 deg in hot water mode, and the RTV is rated 600 deg.