Coal Delivery 10Tons Bulk Anywhere in Northeast

Forum rules
ATTN Business owners: You may advertise your companies coal related products and services for free in this section of the forum. Use the "Contact Admin" link at the bottom of any page or send a private message to Richard S. to become a "Verified Business Rep" so you can start new topics here.

Also note you are encouraged to respond to topics started by other members in other forums about your business. You may also start topics in other forums about your products if they are informational. As an example if you are a manufacturer of coal boilers you may start a topic in the boiler section on how to service it.
 
07roadstar
Member
Posts: 75
Joined: Wed. Jan. 25, 2012 8:40 pm
Location: Keeseville, Ny
Hand Fed Coal Furnace: Had DS basement stove
Coal Size/Type: Nut
Other Heating: Burnham oil burner boiler

Post by 07roadstar » Sat. Aug. 16, 2014 5:33 pm

How much for 10 tons of nut delivered to 12944. Thanks
Brett


 
chevymatt
Member
Posts: 81
Joined: Sun. Sep. 11, 2011 1:51 pm
Location: Oneonta NY
Stoker Coal Boiler: AHS S260

Post by chevymatt » Sun. Aug. 17, 2014 8:38 pm

Looking for a quote on 10 tons of Pea from DiRenzo to 13820. Thank you

 
Justify008
Member
Posts: 52
Joined: Sun. Jan. 12, 2014 6:21 pm

Post by Justify008 » Mon. Aug. 18, 2014 10:05 pm

Took me a little bit but I think I caught up on all the pms and emails. If I forgot anybody just send me another pm you may have gotten lost in the inbox. Hope to see some of you soon planning a coal run for next tuesday and wednesday.

 
User avatar
davidmcbeth3
Member
Posts: 8505
Joined: Sun. Jun. 14, 2009 2:31 pm
Coal Size/Type: nut/pea/anthra

Post by davidmcbeth3 » Tue. Aug. 19, 2014 5:50 pm

Ed.A wrote:06331 My interest is piqued.
I'm 30 mi from 06331 (right off I95, new london .. I395 (leading to cantbury right here) .. 5 tons nut?

 
chevymatt
Member
Posts: 81
Joined: Sun. Sep. 11, 2011 1:51 pm
Location: Oneonta NY
Stoker Coal Boiler: AHS S260

Post by chevymatt » Tue. Aug. 19, 2014 8:57 pm

chevymatt wrote:Looking for a quote on 10 tons of Pea from DiRenzo to 13820. Thank you

 
revtim
Member
Posts: 50
Joined: Wed. Aug. 13, 2014 5:57 pm
Location: Dundee, Michigan
Hot Air Coal Stoker Furnace: reading
Hot Air Coal Stoker Stove: keystoker
Coal Size/Type: rice
Other Heating: FALP

Post by revtim » Wed. Aug. 20, 2014 6:06 am

This may be a little too far for you but 10 tons Rice to 48131

 
User avatar
davidmcbeth3
Member
Posts: 8505
Joined: Sun. Jun. 14, 2009 2:31 pm
Coal Size/Type: nut/pea/anthra

Post by davidmcbeth3 » Wed. Aug. 20, 2014 5:42 pm

davidmcbeth3 wrote:
Ed.A wrote:06331 My interest is piqued.
I'm 30 mi from 06331 (right off I95, new london .. I395 (leading to cantbury right here) .. 5 tons nut?
Maybe he is out of coal ?


 
Justify008
Member
Posts: 52
Joined: Sun. Jan. 12, 2014 6:21 pm

Post by Justify008 » Thu. Aug. 21, 2014 9:51 pm

Maybe he is out of coal ?[/quote]

No I am not out of coal I've been on the phone fighting to get the insurance broker to my house the last 2 days unfortunately I loaned my truck to a friend this past Tuesday and this is what I got back
20140821_130743.jpg
.JPG | 167.9KB | 20140821_130743.jpg
I will still give out quotes to anyone thats interested but I won't be able to deliver till insurance cuts me a check so I can go buy a new truck I'm sorry for any inconvenience this has caused.

 
User avatar
SMITTY
Member
Posts: 12520
Joined: Sun. Dec. 11, 2005 12:43 pm
Location: West-Central Mass
Stoker Coal Boiler: EFM 520 Highboy
Coal Size/Type: Rice / Blaschak anthracite
Other Heating: Oil fired Burnham boiler

Post by SMITTY » Thu. Aug. 21, 2014 10:48 pm

Holy *censored*!! He go out bar hoppin or what?? :shock: :o Looks like he went straight into a pole at 30mph! Hope he's ok ... and out of jail!

 
Justify008
Member
Posts: 52
Joined: Sun. Jan. 12, 2014 6:21 pm

Post by Justify008 » Thu. Aug. 21, 2014 11:41 pm

SMITTY wrote:Holy *censored*!! He go out bar hoppin or what?? :shock: :o Looks like he went straight into a pole at 30mph! Hope he's ok ... and out of jail!
Haha actually it was a cedar tree at 40 and believe it or not the cedar tree didn't move an inch haha
20140819_214624.jpg
.JPG | 88KB | 20140819_214624.jpg
ya hes okay for now we have to see how the insurance plays out I still haven't decided if I'm going to hurt him since he hurt my baby haha

 
User avatar
whistlenut
Member
Posts: 3548
Joined: Sat. Mar. 17, 2007 6:29 pm
Location: Central NH, Concord area
Stoker Coal Boiler: AA130's,260's, AHS130&260's,EFM900,GJ & V-Wert
Hand Fed Coal Boiler: Franks,Itasca 415,Jensen, NYer 130,Van Wert
Hot Air Coal Stoker Furnace: Alaska, EFM, Keystoker, Yellow Flame
Hot Air Coal Stoker Stove: Alaska, Keystoker-2,Leisure Line
Hand Fed Coal Stove: Alaska, Gibraltar, Keystone,Vc Vigilant 2
Hand Fed Coal Furnace: Ford, Jensen, NYer, Van Wert,
Baseburners & Antiques: Glenwoods
Coal Size/Type: Barley, Buck, Rice ,Nut, Stove
Other Heating: Oil HWBB

Post by whistlenut » Fri. Aug. 22, 2014 10:22 am

NOTE TO SELF!!!!!!!!!! DO NOT let anyone 'borrow' anything. Hope he is OK, and the circumstances are 'believable'. Is it so bad that you can't buy it back and repair it? I know that interferes with the delivery schedule, so good luck and get back on the road quickly. :idea: :shock:

 
Justify008
Member
Posts: 52
Joined: Sun. Jan. 12, 2014 6:21 pm

Post by Justify008 » Fri. Aug. 22, 2014 6:27 pm

I think there going to total it and if they don't want something ridiculous im prolbably going to buy it back and make it a winter project I have everything to fix the nose on another parts truck. But I already picked out my next one going to look at it tomorrow bank already approved me for it hopefully buy it and register it monday. And maybe still make it to pa this tuesday wednesday if the people I had scheduled are still interested. Fingers crossed it works out this is hopefully the new one.
imagejpeg_4.jpg
.JPG | 120.5KB | imagejpeg_4.jpg

 
User avatar
davidmcbeth3
Member
Posts: 8505
Joined: Sun. Jun. 14, 2009 2:31 pm
Coal Size/Type: nut/pea/anthra

Post by davidmcbeth3 » Fri. Aug. 22, 2014 6:46 pm

Justify008 wrote:Maybe he is out of coal ?
No I am not out of coal I've been on the phone fighting to get the insurance broker to my house the last 2 days unfortunately I loaned my truck to a friend this past Tuesday and this is what I got back
20140821_130743.jpg
I will still give out quotes to anyone thats interested but I won't be able to deliver till insurance cuts me a check so I can go buy a new truck I'm sorry for any inconvenience this has caused.[/quote]

Damn ... hope everyone is OK....

I can wait for delivery if ya can shoot a quote (maybe to both of us in CT -- 5 tonnes each?-can your vehicle (or expect one) carry 10 tonnes. I would borrow your friend's Yugo and max it out !

 
User avatar
madmack
Member
Posts: 21
Joined: Fri. Aug. 19, 2011 5:53 pm
Location: porter corners ny
Stoker Coal Boiler: van wert
Coal Size/Type: buck

Post by madmack » Sat. Aug. 23, 2014 7:50 pm

Justin can I get a quote for 5 or ten ton 12859 I tried to PM but Im not sure I am doing it right

 
coalnewbie
Member
Posts: 8601
Joined: Sat. May. 24, 2008 4:26 pm
Location: Chester, NY
Hot Air Coal Stoker Stove: LL AnthraKing 180K, Pocono110K,KStokr 90K, DVC
Hand Fed Coal Stove: Invader 2
Baseburners & Antiques: Wings Best, Glenwood #8(x2) Herald 116x
Coal Size/Type: Rice,
Other Heating: Heating Oil CH, Toyotomi OM 22

Post by coalnewbie » Sat. Aug. 23, 2014 7:57 pm

And maybe still make it to pa this tuesday wednesday if the people I had scheduled are still interested. Fingers crossed it works out this is hopefully the new one.
Yes, I am still on for 10 tons for Tuesday if you are up or it. If not, I will wait for you to sort this out. Good luck.


Post Reply

Return to “Sales Announcements & Other Information From Business's”