Looking for Customers to Act as References

Forum rules
ATTN Business owners: You may advertise your companies coal related products and services for free in this section of the forum. Use the "Contact Admin" link at the bottom of any page or send a private message to Richard S. to become a "Verified Business Rep" so you can start new topics here.

Also note you are encouraged to respond to topics started by other members in other forums about your business. You may also start topics in other forums about your products if they are informational. As an example if you are a manufacturer of coal boilers you may start a topic in the boiler section on how to service it.
 
User avatar
PatrickAHS
Member
Posts: 141
Joined: Wed. Oct. 01, 2008 10:12 am

Post by PatrickAHS » Mon. Feb. 23, 2009 4:59 pm

I need happy customers that are willing to show their Coal Gun to others.

I especially need references in the Southern NY and Northern PA area. Eldred, Olean, Franklinville, etc.

Thanks in advance.


 
jhish
New Member
Posts: 15
Joined: Sat. Feb. 14, 2009 3:13 pm

Post by jhish » Mon. Feb. 23, 2009 6:36 pm

I'd love to, but I'm too far South. I'm a half hour South of Allentown.

 
User avatar
whistlenut
Member
Posts: 3548
Joined: Sat. Mar. 17, 2007 6:29 pm
Location: Central NH, Concord area
Stoker Coal Boiler: AA130's,260's, AHS130&260's,EFM900,GJ & V-Wert
Hand Fed Coal Boiler: Franks,Itasca 415,Jensen, NYer 130,Van Wert
Hot Air Coal Stoker Furnace: Alaska, EFM, Keystoker, Yellow Flame
Hot Air Coal Stoker Stove: Alaska, Keystoker-2,Leisure Line
Hand Fed Coal Stove: Alaska, Gibraltar, Keystone,Vc Vigilant 2
Hand Fed Coal Furnace: Ford, Jensen, NYer, Van Wert,
Baseburners & Antiques: Glenwoods
Coal Size/Type: Barley, Buck, Rice ,Nut, Stove
Other Heating: Oil HWBB

Post by whistlenut » Mon. Feb. 23, 2009 6:41 pm

I am available, in the 03301 area

 
User avatar
WNY
Member
Posts: 6307
Joined: Mon. Nov. 14, 2005 8:40 am
Location: Cuba, NY
Hot Air Coal Stoker Stove: Keystoker 90K, Leisure Line Hyfire I
Coal Size/Type: Rice
Contact:

Post by WNY » Mon. Feb. 23, 2009 7:36 pm

I would if I had one! I am in that area. Looking for a Demo house? (hint, hint).

 
User avatar
PatrickAHS
Member
Posts: 141
Joined: Wed. Oct. 01, 2008 10:12 am

Post by PatrickAHS » Tue. Feb. 24, 2009 7:48 am

WNY wrote:I would if I had one! I am in that area. Looking for a Demo house? (hint, hint).
:lol:

 
User avatar
WNY
Member
Posts: 6307
Joined: Mon. Nov. 14, 2005 8:40 am
Location: Cuba, NY
Hot Air Coal Stoker Stove: Keystoker 90K, Leisure Line Hyfire I
Coal Size/Type: Rice
Contact:

Post by WNY » Tue. Feb. 24, 2009 9:01 am

I want to switch to a boiler anyway..... :)

 
User avatar
whistlenut
Member
Posts: 3548
Joined: Sat. Mar. 17, 2007 6:29 pm
Location: Central NH, Concord area
Stoker Coal Boiler: AA130's,260's, AHS130&260's,EFM900,GJ & V-Wert
Hand Fed Coal Boiler: Franks,Itasca 415,Jensen, NYer 130,Van Wert
Hot Air Coal Stoker Furnace: Alaska, EFM, Keystoker, Yellow Flame
Hot Air Coal Stoker Stove: Alaska, Keystoker-2,Leisure Line
Hand Fed Coal Stove: Alaska, Gibraltar, Keystone,Vc Vigilant 2
Hand Fed Coal Furnace: Ford, Jensen, NYer, Van Wert,
Baseburners & Antiques: Glenwoods
Coal Size/Type: Barley, Buck, Rice ,Nut, Stove
Other Heating: Oil HWBB

Post by whistlenut » Tue. Feb. 24, 2009 9:15 am

Perhaps you can have a try with the eco-friendly solar powered controls/ wind generator assisted, tidal water backup low fly ash models due out this summer. Snap in a few relays in the din rail and off you go!.....and then there are the folks with a 'coal chubby' for some 31 years. I thought any more than 4 hrs was a big problem.........


 
furnacetechpandh
New Member
Posts: 1
Joined: Fri. Feb. 27, 2009 4:09 pm

Post by furnacetechpandh » Fri. Feb. 27, 2009 4:27 pm

Distributor for AHS

If anyone wants to see the coal gun in operation they can come to our showroom in dunmore p.a. 771 E. Drinker st.
You can also call me at 1-800-851-9460 to make an appointment.

Thanks
TOM RABEL OWNER OF FURNACE TECH PLUMBING AND HEATING

 
User avatar
PatrickAHS
Member
Posts: 141
Joined: Wed. Oct. 01, 2008 10:12 am

Post by PatrickAHS » Fri. Feb. 27, 2009 4:58 pm

Thanks for the responses guys

 
billnj
New Member
Posts: 11
Joined: Mon. Mar. 31, 2008 7:54 am
Location: Kinnelon New Jersey

Post by billnj » Wed. Mar. 11, 2009 8:52 pm

I'm in Northern NJ, 07405. I'd be happy to show my boiler to your customers.

 
User avatar
pelletsrevil
New Member
Posts: 6
Joined: Fri. Oct. 03, 2008 7:17 am
Location: Lakeville,PA

Post by pelletsrevil » Wed. Mar. 25, 2009 8:08 am

Overheard you talking to Jim Brown yesterday. I'm in Wayne County where a lot of people are getting rid of propane and going with something else. I could be your demo house in Wayne County. It's funny how I've looking into coal for 6 months and never heard of you until yesterday,you need some Wayne County exposure!

 
User avatar
ramien
New Member
Posts: 5
Joined: Sun. Nov. 09, 2008 2:45 pm
Stoker Coal Boiler: AHS-130 2007
Coal Size/Type: Pea/Blaschak Anthracite

Post by ramien » Thu. Apr. 23, 2009 10:52 pm

If you ever need some one here in S. Maine let me know, zip 04084. Jason M.

 
User avatar
MacCoon
New Member
Posts: 16
Joined: Mon. Dec. 22, 2008 9:39 am

Post by MacCoon » Mon. Sep. 14, 2009 9:29 pm

Absolutely. I am located in Central New York Homer, 13077. 30 Minutes from Syracuse, 45 Minutes from Binghamton.

Featuring:
34 Cu Yd Coal Bin
Auger feed coal to hopper, two stage
S130, #41
Auger feed ash away from stoker, two stage

 
User avatar
Poconoeagle
Member
Posts: 6397
Joined: Sat. Nov. 08, 2008 7:26 pm
Location: Tobyhanna PA

Post by Poconoeagle » Mon. Sep. 14, 2009 9:36 pm

pics!!! we love pics macCoon 8-)

 
User avatar
cArNaGe
Member
Posts: 1102
Joined: Wed. Dec. 12, 2007 11:34 pm
Location: Montrose, PA

Post by cArNaGe » Tue. Sep. 15, 2009 1:53 am

Poconoeagle wrote:pics!!! we love pics macCoon 8-)
He posted last year.

AHS S130 Installation by Maccoon

And I thought you were going to change your name to CoalBlower


Post Reply

Return to “Sales Announcements & Other Information From Business's”