Help identifying CONTENT stove

Post Reply
 
kentuckyguy
New Member
Posts: 4
Joined: Mon. Oct. 17, 2022 6:19 pm

Post by kentuckyguy » Mon. Oct. 17, 2022 6:21 pm

I enjoy restoring older things and have been looking to pick up a coal stove to restore for my shop.

I came across one locally but have been unable to find any information on it.

The only writing I can’t find on it is CONTENT

Image

 
User avatar
carlherrnstein
Member
Posts: 1533
Joined: Tue. Feb. 07, 2012 8:49 am
Location: Clarksburg, ohio
Hot Air Coal Stoker Stove: combustioneer model 77B
Coal Size/Type: pea stoker/Ohio bituminous

Post by carlherrnstein » Sat. Oct. 22, 2022 9:58 am

Too fancy for a shop in my opinion, put it in the living room. There were hundreds of different stove brands over the years. I don't recognize it but, based on the fine detail of the castings I would bet it was a high end model when it was new.

It needs legs, and is probably missing it's finial. What's the firebox and grate like?


 
kentuckyguy
New Member
Posts: 4
Joined: Mon. Oct. 17, 2022 6:19 pm

Post by kentuckyguy » Sat. Oct. 22, 2022 3:48 pm

Well it’s sold now I snoozed too long. It had good grates that came in from the side.

 
User avatar
carlherrnstein
Member
Posts: 1533
Joined: Tue. Feb. 07, 2012 8:49 am
Location: Clarksburg, ohio
Hot Air Coal Stoker Stove: combustioneer model 77B
Coal Size/Type: pea stoker/Ohio bituminous

Post by carlherrnstein » Sat. Oct. 22, 2022 4:38 pm

It happens, I missed out on a combustioneer cause I didn't get to the phone quick enough..... As a general rule the more details the castings have the better the stove. Isenglass is pretty but fragile and something to avoid a lot of if you plan to use it a lot but, sheet metal can go in it's place. For a shop I would look out for a warm morning stove.

Post Reply

Return to “Coal Stoker Boilers & Hot Air Furnaces/Stoves Using Bituminous”