Coalpail.com Forum

Hi everyone ..
So i recently found a oil gun for my VF but I wanted to ask if it looks complete to the trained eyes of you guys .
Here's a few pics ..let me know what you think !
Thanks very much ..Ernie

It looks good from my house.

You have a older style transformer and motor. They are the better kind then the new electric versions. I would crack the pump, clean and or replace the filter. Then pull the nozzle assembly, replace the nozzle, clean up the electrodes and head with carb cleaner. Get the nozzle adjustment gauge or the plastic so brain orange gauge. The plastic gauge is expensive for a piece of plastic and breaks easy, do gentle handles are needed. Finally replace the gasket.

Thanks for the posts guys !

Holdencoal...
Can you elaborate more on the nozzle adj gauge your talking about or the plastic so brain orange gauge ?
I'm not familiar with these ...thanks !
Ernie

I recommend a Beckett t501 or a NOSguage if you are not used to setting up a burner.

Also, check out Beckett training on YouTube.

Thanks Holdencoal...
I know what your referring to now .
Thanks ... Ernie

I just noticed I posted in the wrong category...could someone help me out how to get it over to Anthracite instead of Bituminous ?
Thanks ..Ernie

just click exclamation mark--top right-- & type in please move to anthracite section--hopefully one of the mods isn't sleeping!!! LOL

I moved it hours ago Fred...while you were napping!

I was actually!!!!!!!!! Nobody said this getting old was gonna be easier--OR--not tiring!!!!!!!!!!!!! LOL Good on you Rob!!