How Do I Replace the Coal Bin in a Combustioneer 77B

Post Reply
User avatar
goblin79
Member
Posts: 28
Joined: Fri. Nov. 05, 2010 11:29 pm
Stove/Furnace Make: warm morning/Wil-Burt
Stove/Furnace Model: 414/Combustioneer
Location: Leatherwood Ky

Post By: goblin79 » Thu. Jan. 12, 2012 5:44 pm

do I have to remove the trans auger and all or just the moter blower assy

User avatar
Willis
Member
Posts: 120
Joined: Tue. Aug. 26, 2008 7:36 am
Hot Air Coal Stoker Furnace: Combustioneer 24 FA w/ Will-Burt s-30
Hot Air Coal Stoker Stove: Combustioneer 77, Stokermatic
Hand Fed Coal Stove: Warm Morning 520,521
Coal Size/Type: Washed stoker- Bituminous
Location: Cadiz, OH

Post By: Willis » Thu. Jan. 12, 2012 10:16 pm

Just looking at mine that is stripped down at the moment, it looks like a total disassembly. The bin is also riveted to the base that the firepot and burn chamber sits on. I used 1/8 drillbit to drill all the rivets out. If you have any other questions before you tear into yours let me know because mine is in pieces and I'd be glad to take pics.


User avatar
rockwood
Member
Posts: 1377
Joined: Sun. Sep. 21, 2008 7:37 pm
Hot Air Coal Stoker Furnace: Stokermatic coal furnace
Hand Fed Coal Stove: Rockwood Stoveworks Circulator
Baseburners & Antiques: Malleable/Monarch Range
Coal Size/Type: Soft coal: Lump and stoker (slack coal)
Location: Utah

Post By: rockwood » Thu. Jan. 12, 2012 10:33 pm

Why are you replacing it? Is it rusted through?

User avatar
goblin79
Member
Posts: 28
Joined: Fri. Nov. 05, 2010 11:29 pm
Stove/Furnace Make: warm morning/Wil-Burt
Stove/Furnace Model: 414/Combustioneer
Location: Leatherwood Ky

Post By: goblin79 » Thu. Jan. 12, 2012 10:49 pm

rusted though ive patched it for the last 2 years ill probly tri to get the wenter out of it and replace the hole stove with 1 of my other 4

Post Reply

Return to “Coal Stoker Boilers & Hot Air Furnaces/Stoves Using Bituminous”