markc
Pics of Coalman up and Running on Ky Bit
- rockwood
- Member
- Posts: 1381
- Joined: Sun. Sep. 21, 2008 7:37 pm
- Location: Utah
- Hot Air Coal Stoker Furnace: Stokermatic
- Hand Fed Coal Stove: Rockwood Stoveworks Circulator
- Baseburners & Antiques: Malleable/Monarch Range
- Coal Size/Type: Lump and stoker + Blaschak-stove size
Here's the pdf brochure for it. Looked at this one a while back.....all I can do is dream about it
markc, Are you just lifting buckets up and dumping them in or how are you filling the hopper?
markc, Are you just lifting buckets up and dumping them in or how are you filling the hopper?
Attachments
right now I am a bucket lifter next season once my bin is empty iam going to put in a 4 inch grain auger on a regular light switch control and I have an old auger to fabricate an ash auger for the bottom of the fire box,the stove holds about a weeks worth of coal ( about 20 full buckets),i bought this stove from
heatinnovations.com they are the mfg the guy to talk to is tim suderman 1-888-385-4328 they helped me with everything a complete flow process cad drawing tech support and even componet locations my house is 23 ft above my stove and shop is 8 feet above the stove so I had to use a pressurized system directly after the stove running aprox 260 feet to the house and only loosing 2 degrees in temp
mark
heatinnovations.com they are the mfg the guy to talk to is tim suderman 1-888-385-4328 they helped me with everything a complete flow process cad drawing tech support and even componet locations my house is 23 ft above my stove and shop is 8 feet above the stove so I had to use a pressurized system directly after the stove running aprox 260 feet to the house and only loosing 2 degrees in temp
mark
Boy, that is a really nice looking set up!
I wonder, since you have it installed in an enclosed outbuilding, whether installing a barometric draft regulator in your pipe would help with efficiency? Just a thought.
I wonder, since you have it installed in an enclosed outbuilding, whether installing a barometric draft regulator in your pipe would help with efficiency? Just a thought.
- rockwood
- Member
- Posts: 1381
- Joined: Sun. Sep. 21, 2008 7:37 pm
- Location: Utah
- Hot Air Coal Stoker Furnace: Stokermatic
- Hand Fed Coal Stove: Rockwood Stoveworks Circulator
- Baseburners & Antiques: Malleable/Monarch Range
- Coal Size/Type: Lump and stoker + Blaschak-stove size
If you get that ash removal going you will have the ultimate setup ...all you have to do is monitor the system and maybe deal with a clinker or two..... If I were to put in a coal boiler I would do it exactly like you have.markc wrote:right now I am a bucket lifter next season once my bin is empty iam going to put in a 4 inch grain auger on a regular light switch control and I have an old auger to fabricate an ash auger for the bottom of the fire box,the stove holds about a weeks worth of coal ( about 20 full buckets)
mark
- mr1precision
- Member
- Posts: 1100
- Joined: Mon. Oct. 13, 2008 6:54 pm
- Location: Boylston Ma.
- Stoker Coal Boiler: Axeman-Anderson AA-130
Nice and neat! Great job!
- Duengeon master
- Member
- Posts: 1958
- Joined: Sun. May. 06, 2007 7:32 am
- Location: Penndel, Pa.
- Hand Fed Coal Stove: Harmon Mark III
- Coal Size/Type: Anthracite pea and nut mix. Bituminous lump
looks great to me! two thumbs up!
- Duengeon master
- Member
- Posts: 1958
- Joined: Sun. May. 06, 2007 7:32 am
- Location: Penndel, Pa.
- Hand Fed Coal Stove: Harmon Mark III
- Coal Size/Type: Anthracite pea and nut mix. Bituminous lump
You should be able to get a strap on at an adult book store. No serious any fireplace store or Home Depot should have one.markc wrote:where can I get strap on
markc