Franco Belge Parts

Post Reply
 
winstonsmith
New Member
Posts: 15
Joined: Sat. Dec. 29, 2007 1:13 am
Location: Bloomsbury, NJ

Post by winstonsmith » Thu. Nov. 20, 2008 9:39 pm

I need to pick up a new grate for my trusty Franco Belge. I am near phillipsburg, Nj and wanted to know who has parts. I have a coal stove with the inserts on the side of the guy cutting the tree. The stove has 2 small grates in the fire box that fit into 2 larger round grates. One of my round ones busted. Kind of need it a hurry. any ideas?

Joe

 
User avatar
tsb
Member
Posts: 2616
Joined: Wed. Jul. 30, 2008 8:38 pm
Location: Douglassville, Pa
Stoker Coal Boiler: Binford 2000
Hot Air Coal Stoker Stove: LL Pioneer top vent
Hand Fed Coal Stove: Saey Hanover II
Baseburners & Antiques: Grander Golden Oak , Glenwood # 6
Coal Size/Type: All of them

Post by tsb » Thu. Nov. 20, 2008 10:48 pm

http://www.kcstovesandfireplaces.com/

This guy used to handle Franco Belge stoves, he may still have some parts.


 
User avatar
N2wly
Member
Posts: 36
Joined: Sun. Jul. 21, 2019 7:20 pm
Location: NEW JERSEY
Hand Fed Coal Stove: Franco Belge 10.275
Coal Size/Type: Pea

Post by N2wly » Wed. Nov. 03, 2021 7:19 pm

I have the same stove and was out to kc stoves in PA. The have little to nothing for parts. The original owner was a Franco Belge dealer and years back I got loads of parts from them. There is another site that sells those parts I think it’s called woodsman. I’ve seen those parts listed there. Found it.
https://www.woodmanspartsplus.com/

 
Den034071
Member
Posts: 907
Joined: Sat. Jun. 25, 2011 4:30 pm
Hand Fed Coal Stove: Hitzer, 3095

Post by Den034071 » Fri. Nov. 05, 2021 10:14 am

N sent you a pm jack

Post Reply

Return to “Imported Hand Fired Coal Stoves Using Anthracite”