Haas & Sohn Hopper Fed Stove

 
Gonset
New Member
Posts: 7
Joined: Mon. Jan. 10, 2022 5:46 am

Post by Gonset » Sun. Jan. 23, 2022 12:07 pm

Does anyone know the length of smoke pipe that is needed for a good draft for the above stove.

cheers

Bill

 
User avatar
McGiever
Member
Posts: 10130
Joined: Sun. May. 02, 2010 11:26 pm
Location: Junction of PA-OH-WV
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Hand Fed Coal Boiler: BUCKET A DAY water heater
Hand Fed Coal Stove: Warm Morning 414A
Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
Other Heating: Ground Source Heat Pump and some Solar

Post by McGiever » Mon. Jan. 24, 2022 12:19 pm

Gonset wrote:
Sun. Jan. 23, 2022 12:07 pm
Does anyone know the length of smoke pipe that is needed for a good draft for the above stove.
Assume you are asking for length of flexible liner from stove collar going up through a fireplace damper and up into a masonry chimney, is this correct?

If this is what you ask then It depends, but I see supplies sell such pipe in 5’-6’ lengths.

Something like this:
Image

https://www.northlineexpress.com/6-x-60-duraliner ... -6058.html

A 100% seal at damper/smoke shelf will give 100% chimney function. Anything less will give less draft. And the difference is a portion of your generated heat is quickly removed to the chimney top.

 
Gonset
New Member
Posts: 7
Joined: Mon. Jan. 10, 2022 5:46 am

Post by Gonset » Mon. Jan. 24, 2022 12:51 pm

Ty for the reply. But the pipe will be going through the wood cement wall actually stucco .then a 90 than up and away piece.
Just need a gud length.
Thanks
Bill


 
User avatar
McGiever
Member
Posts: 10130
Joined: Sun. May. 02, 2010 11:26 pm
Location: Junction of PA-OH-WV
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Hand Fed Coal Boiler: BUCKET A DAY water heater
Hand Fed Coal Stove: Warm Morning 414A
Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
Other Heating: Ground Source Heat Pump and some Solar

Post by McGiever » Mon. Jan. 24, 2022 7:30 pm

Gonset wrote:
Sun. Jan. 23, 2022 12:07 pm
Does anyone know the length of smoke pipe that is needed for a good draft for the above stove.
Okay 3 feet minimum plus 2 feet higher then anything within 10 feet radius.

https://woodstovepro.com/articles/understanding-t ... -roofline/

 
Gonset
New Member
Posts: 7
Joined: Mon. Jan. 10, 2022 5:46 am

Post by Gonset » Mon. Jan. 24, 2022 8:50 pm

Ty u so much. Cheers

Bill

Post Reply

Return to “Imported Hand Fired Coal Stoves Using Anthracite”