Weso HSK125c - how to transport without damage

 
waytomany?s
Member
Posts: 3747
Joined: Fri. Aug. 16, 2019 3:02 pm
Location: Oneida, N.Y.
Hand Fed Coal Stove: Harmon Mark II
Hand Fed Coal Furnace: Looking
Baseburners & Antiques: Looking
Coal Size/Type: Nut
Other Heating: newmac wood/coal combo furnace

Post by waytomany?s » Sun. Jan. 29, 2023 7:45 pm

WESOman wrote:
Sun. Jan. 29, 2023 12:45 pm
Did you figure out that you could loosen two nuts on each side and after unscrewing the top tile panel, just lift off the two ends? I have the exact same stove as your brown tile and damaging those tiles is what scares me.
Considering he did it over 2 years ago, I'm not so sure you're going to get an answer.


 
WESOman
Member
Posts: 88
Joined: Sun. Dec. 01, 2019 5:29 pm
Hand Fed Coal Stove: WESO HSK125C
Other Heating: Oil-fired hot water boiler

Post by WESOman » Mon. Jan. 30, 2023 8:03 pm

waytomany?s wrote:
Sun. Jan. 29, 2023 7:45 pm
Considering he did it over 2 years ago, I'm not so sure you're going to get an answer.
I figured as much but if someone asks the same question about removing the tiles, they may see my answer.

Post Reply

Return to “Imported Hand Fired Coal Stoves Using Anthracite”