Obviously, I am too young to know what this is. Can you provide a picture?VigIIPeaBurner wrote: ↑Sun. Dec. 08, 2019 9:27 pmIf you can find good old fashion water glass, that works well without building out the rabbit. I was lucky and found a small dropper bottle at my local hardware store in the stove gasket area. It wasn't labeled as water glass but just look for sodium silicate on the bottle.
I wouldn't advise it but you can make it yourself with lye and silica gel. Formulas are out there just like everything else.
How to Get Rutland Cement Off?
-
- Member
- Posts: 6077
- Joined: Wed. Jan. 18, 2017 11:30 pm
- Location: swOH near a little town where the homes are mobile and the cars aren’t
- Hand Fed Coal Stove: Hitzer 354
- Coal Size/Type: nut coal
- Other Heating: electric, wood, oil
-
- Member
- Posts: 6077
- Joined: Wed. Jan. 18, 2017 11:30 pm
- Location: swOH near a little town where the homes are mobile and the cars aren’t
- Hand Fed Coal Stove: Hitzer 354
- Coal Size/Type: nut coal
- Other Heating: electric, wood, oil
This was helpful in knowing what it is, but I’d have a hard time using a gallon. Lol!!!CapeCoaler wrote: ↑Mon. Dec. 09, 2019 10:53 amhttps://www.rutland.com/product/water-glass-cemen ... 16fd43adaa
Waterglass by the gallon...
-
- Member
- Posts: 6077
- Joined: Wed. Jan. 18, 2017 11:30 pm
- Location: swOH near a little town where the homes are mobile and the cars aren’t
- Hand Fed Coal Stove: Hitzer 354
- Coal Size/Type: nut coal
- Other Heating: electric, wood, oil
Thanks, Larry! Good to know. I think Inseen this product at Menards.
-
- Member
- Posts: 6515
- Joined: Sun. Feb. 10, 2008 3:48 pm
- Location: Cape Cod, MA
- Stoker Coal Boiler: want AA130
- Hand Fed Coal Stove: DS Machine BS#4, Harman MKII, Hitzer 503,...
- Coal Size/Type: Pea/Nut/Stove
-
- Member
- Posts: 6077
- Joined: Wed. Jan. 18, 2017 11:30 pm
- Location: swOH near a little town where the homes are mobile and the cars aren’t
- Hand Fed Coal Stove: Hitzer 354
- Coal Size/Type: nut coal
- Other Heating: electric, wood, oil
Yeah...lol. I just have to find the need for it. Good info to know.CapeCoaler wrote: ↑Mon. Dec. 09, 2019 12:04 pmBut it is so much more...
Nice adhesive and floor sealer too...
I wonder if it would pass insurance claims adjuster scrutiny in the event of a catastrophe caused by an over-fired stove?
- VigIIPeaBurner
- Member
- Posts: 2579
- Joined: Fri. Jan. 11, 2008 10:49 am
- Location: Pequest River Valley, Warren Co NJ
- Hot Air Coal Stoker Furnace: Keystoker Koker(down)
- Hand Fed Coal Stove: Vermont Casting Vigilant II 2310
- Other Heating: #2 Oil Furnace
They used water glass in iron and steel blast furnaces back when I worked maintenance.
-
- Member
- Posts: 6515
- Joined: Sun. Feb. 10, 2008 3:48 pm
- Location: Cape Cod, MA
- Stoker Coal Boiler: want AA130
- Hand Fed Coal Stove: DS Machine BS#4, Harman MKII, Hitzer 503,...
- Coal Size/Type: Pea/Nut/Stove
And you can preserve eggs with no refrigeration...
- VigIIPeaBurner
- Member
- Posts: 2579
- Joined: Fri. Jan. 11, 2008 10:49 am
- Location: Pequest River Valley, Warren Co NJ
- Hot Air Coal Stoker Furnace: Keystoker Koker(down)
- Hand Fed Coal Stove: Vermont Casting Vigilant II 2310
- Other Heating: #2 Oil Furnace
That method came out about the same time as the baseburners of the early 20th century, but that's, and this, is off topic
- Pauliewog
- Member
- Posts: 1824
- Joined: Mon. Dec. 02, 2013 12:15 am
- Location: Pittston, Pennsylvania
- Hot Air Coal Stoker Furnace: Alaska 140 Dual Paddle Feed
- Baseburners & Antiques: Fame Rosemont #20, Home Stove Works #25, Glenwood #6, Happy Thought Oak, Merry Bride #214, Sunnyside, Worlds Argand #114, New Golden Sun , & About 30 others.
- Coal Size/Type: Stove, Chesnut, Pea, Rice / Anthracite
We used it as a binder for custom high temperature refractory liners.VigIIPeaBurner wrote: ↑Mon. Dec. 09, 2019 1:45 pmThey used water glass in iron and steel blast furnaces back when I worked maintenance.
It can also be used as a binder for no bake foundry cores and molds.
Introducing a small amount of CO2 into the mold or core quickly hardens the mold sand with results very similar to chemically bonded sand.
Paulie
- McGiever
- Member
- Posts: 10130
- Joined: Sun. May. 02, 2010 11:26 pm
- Location: Junction of PA-OH-WV
- Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
- Hand Fed Coal Boiler: BUCKET A DAY water heater
- Hand Fed Coal Stove: Warm Morning 414A
- Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
- Other Heating: Ground Source Heat Pump and some Solar
Geez, no silicone caulk in blast furnace
-
- Member
- Posts: 6077
- Joined: Wed. Jan. 18, 2017 11:30 pm
- Location: swOH near a little town where the homes are mobile and the cars aren’t
- Hand Fed Coal Stove: Hitzer 354
- Coal Size/Type: nut coal
- Other Heating: electric, wood, oil
We wash ours before we eat them...and they don’t last long enough to stick around that long.VigIIPeaBurner wrote: ↑Mon. Dec. 09, 2019 4:31 pmThat method came out about the same time as the baseburners of the early 20th century, but that's, and this, is off topic
This place never ceases to amaze me. Full of good people and ideas.
They say you aren’t trying hard enough if you don’t learn something very day.
Care to elaborate more Paulie? Very interesting. First time in my life I’ve heard of water glass...and I was like those people in the commercials....whaaaaaaat!!! Lol!
- Pauliewog
- Member
- Posts: 1824
- Joined: Mon. Dec. 02, 2013 12:15 am
- Location: Pittston, Pennsylvania
- Hot Air Coal Stoker Furnace: Alaska 140 Dual Paddle Feed
- Baseburners & Antiques: Fame Rosemont #20, Home Stove Works #25, Glenwood #6, Happy Thought Oak, Merry Bride #214, Sunnyside, Worlds Argand #114, New Golden Sun , & About 30 others.
- Coal Size/Type: Stove, Chesnut, Pea, Rice / Anthracite
Bill,Hoytman wrote: ↑Mon. Dec. 09, 2019 10:22 pmWe wash ours before we eat them...and they don’t last long enough to stick around that long.
This place never ceases to amaze me. Full of good people and ideas.
They say you aren’t trying hard enough if you don’t learn something very day.
Care to elaborate more Paulie? Very interesting. First time in my life I’ve heard of water glass...and I was like those people in the commercials....whaaaaaaat!!! Lol!
Here is a pretty good link to foundry sand molding using Water glass & CO2
http://railwaybobrestorations.blogspot.com/2010/0 ... e.html?m=1
Paulie
-
- Member
- Posts: 6077
- Joined: Wed. Jan. 18, 2017 11:30 pm
- Location: swOH near a little town where the homes are mobile and the cars aren’t
- Hand Fed Coal Stove: Hitzer 354
- Coal Size/Type: nut coal
- Other Heating: electric, wood, oil
Thank ye, Sir!!! I will check this out tomorrow.
Well, I couldn’t wait. Almost lost me with all the chemical CO2 and sodium silicate jargon since that’s never been a strong suit of mine, but I pressed onward.
I had to back up and re-read the part where they injected the CO2 and the thing hardened up. Was like, whaaaat! Lol! So, I re-read it three times. That is pretty interesting stuff.
I never did see what type of sand is used though. For the purpose I am guessing a real fine sand so the casting would present a smooth surface.
Now, me and chemistry class never did agree, lol. These days I limp along as best I can. So without using the old familiar Google friend let me take a stab at this.
You guys point me in the right direction if I miss a base.
Sodium is salt, obviously.
Silicate is a sand I believe.
Sodium silicate, it would make sense might be some sort of salt sand mixed with water? In this case a heavy syrupy liquid?
CO2 would freeze it? Then set up some sort of chemical reaction for the casting to remain hard after it warmed up?
Well, I couldn’t wait. Almost lost me with all the chemical CO2 and sodium silicate jargon since that’s never been a strong suit of mine, but I pressed onward.
I had to back up and re-read the part where they injected the CO2 and the thing hardened up. Was like, whaaaat! Lol! So, I re-read it three times. That is pretty interesting stuff.
I never did see what type of sand is used though. For the purpose I am guessing a real fine sand so the casting would present a smooth surface.
Now, me and chemistry class never did agree, lol. These days I limp along as best I can. So without using the old familiar Google friend let me take a stab at this.
You guys point me in the right direction if I miss a base.
Sodium is salt, obviously.
Silicate is a sand I believe.
Sodium silicate, it would make sense might be some sort of salt sand mixed with water? In this case a heavy syrupy liquid?
CO2 would freeze it? Then set up some sort of chemical reaction for the casting to remain hard after it warmed up?
- VigIIPeaBurner
- Member
- Posts: 2579
- Joined: Fri. Jan. 11, 2008 10:49 am
- Location: Pequest River Valley, Warren Co NJ
- Hot Air Coal Stoker Furnace: Keystoker Koker(down)
- Hand Fed Coal Stove: Vermont Casting Vigilant II 2310
- Other Heating: #2 Oil Furnace
Sodium is in table/rock salt but it's bonded to chlorine too much to use in this way. Lye is sodium hydroxide - pure drain cleaner is too.
Silica can be sourced from those drying packets that come with the product the Chinese ship to us.
Edit: forgot the CO2 - the cold stuff is what you're seeing from fire extinguishers I guess. The gas is what they use at soda fountains and bars to keep the soda/beer from going flat. Home brewing stores carry it.
Here, check this out - but don't try it without more personal protection than he uses.
Silica can be sourced from those drying packets that come with the product the Chinese ship to us.
Edit: forgot the CO2 - the cold stuff is what you're seeing from fire extinguishers I guess. The gas is what they use at soda fountains and bars to keep the soda/beer from going flat. Home brewing stores carry it.
Here, check this out - but don't try it without more personal protection than he uses.
- Pauliewog
- Member
- Posts: 1824
- Joined: Mon. Dec. 02, 2013 12:15 am
- Location: Pittston, Pennsylvania
- Hot Air Coal Stoker Furnace: Alaska 140 Dual Paddle Feed
- Baseburners & Antiques: Fame Rosemont #20, Home Stove Works #25, Glenwood #6, Happy Thought Oak, Merry Bride #214, Sunnyside, Worlds Argand #114, New Golden Sun , & About 30 others.
- Coal Size/Type: Stove, Chesnut, Pea, Rice / Anthracite
The CO2 does not actually freeze the sodium silicate to the sand, it sets up a chemical reaction and will harden the sand to a chalk like consistency.
Paulie
Paulie