HAAS+SOHN???

franco b
Site Moderator
Posts: 9174
Joined: Wed. Nov. 05, 2008 5:11 pm
Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
Baseburners & Antiques: Glenwood Modern Oak 114
Coal Size/Type: nut and pea
Location: Kent CT

Post By: franco b » Wed. Jan. 24, 2018 9:46 pm

It looks like you do not have a hopper in that model. Load to door opening and you can also slope to the back. The top door is for cleanout.

mwzad
New Member
Posts: 10
Joined: Sat. Oct. 07, 2017 11:44 am

Post By: mwzad » Sat. Jan. 27, 2018 9:58 am

OK got it. Thank again, my air control on the right side says automatic and hand? I’m guessing the automatic is operated off of temperature? I attached a picture to show the dial.
Attachments
57447BA2-F7CE-45D2-95D5-DDB2090FB7DA.jpeg

franco b
Site Moderator
Posts: 9174
Joined: Wed. Nov. 05, 2008 5:11 pm
Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
Baseburners & Antiques: Glenwood Modern Oak 114
Coal Size/Type: nut and pea
Location: Kent CT

Post By: franco b » Sat. Jan. 27, 2018 10:16 am

Yes, rotating the dial 180 degrees, manual operation can be selected. Best to use automatik though.

mwzad
New Member
Posts: 10
Joined: Sat. Oct. 07, 2017 11:44 am

Post By: mwzad » Sat. Jan. 27, 2018 10:57 am

Ok 5 is the highest setting for automatik and III is the highest setting for manual?


franco b
Site Moderator
Posts: 9174
Joined: Wed. Nov. 05, 2008 5:11 pm
Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
Baseburners & Antiques: Glenwood Modern Oak 114
Coal Size/Type: nut and pea
Location: Kent CT

Post By: franco b » Sat. Jan. 27, 2018 4:20 pm

With the manual setting you will have to actually look at the flap to judge how open it is and how that relates to the number on the dial.

Use the automatic starting at a mid point on the dial and adjust from there depending on the heat output you want. Remember to allow time for any adjustment to take effect.

mwzad
New Member
Posts: 10
Joined: Sat. Oct. 07, 2017 11:44 am

Post By: mwzad » Sat. Jan. 27, 2018 9:10 pm

Got it Franco thanks!

User avatar
2001Sierra
Member
Posts: 1917
Joined: Wed. May. 20, 2009 8:09 am
Hot Air Coal Stoker Stove: Keystoker 90 Chimney vent
Coal Size/Type: Rice
Other Heating: Buderus Oil Boiler 3115-34
Stove/Furnace Model: Keystoker 90 Chimney Vent
Location: Wynantskill NY, 10 miles from Albany

Post By: 2001Sierra » Sat. Jan. 27, 2018 10:36 pm

I would only rely on automatic. That is my experience with my Buderus. These stoves do not like being maxed out. Ash build up will soon be an issue.

Post Reply

Return to “Imported Hand Fired Coal Stoves Using Anthracite”