Saey Breman 1 Coal Stove Help
- holder89
- New Member
- Posts: 11
- Joined: Sat. Nov. 05, 2016 7:59 pm
- Location: denver pa
- Hand Fed Coal Stove: breman 1
- Coal Size/Type: nut antharsite
im have a saey breman 1 coal stove. im burning peal coal. the other day I let the stove cool off and gave it a good cleaning cause I was not getting the best heat out of it. I took the hopper parts out vacumed all the coal dust that was built up in the exiting pipe. so now I go to light it up I use just the normal baged wood from the gas station. I do what I normaly do when I lite it. well now it wont stay lit I have no idea why. I have good draft its clean. any help would be awsome
-
- Site Moderator
- Posts: 11417
- Joined: Wed. Nov. 05, 2008 5:11 pm
- Location: Kent CT
- Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
- Baseburners & Antiques: Glenwood Modern Oak 114
- Coal Size/Type: nut and pea
Too thin a bed of burning coal will do that. Grate also must be fully covered with coal, otherwise air can bypass the coal.