Saey Breman 1 Coal Stove Help

Post Reply
User avatar
New Member
Posts: 7
Joined: Sat. Nov. 05, 2016 7:59 pm
Hand Fed Coal Stove: breman 1
Coal Size/Type: nut antharsite
Stove/Furnace Make: saey
Stove/Furnace Model: breman 1
Location: denver pa

Post By: holder89 » Mon. Dec. 19, 2016 4:03 pm

im have a saey breman 1 coal stove. im burning peal coal. the other day I let the stove cool off and gave it a good cleaning cause I was not getting the best heat out of it. I took the hopper parts out vacumed all the coal dust that was built up in the exiting pipe. so now I go to light it up I use just the normal baged wood from the gas station. I do what I normaly do when I lite it. well now it wont stay lit I have no idea why. I have good draft its clean. any help would be awsome

franco b
Site Moderator
Posts: 9641
Joined: Wed. Nov. 05, 2008 5:11 pm
Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
Baseburners & Antiques: Glenwood Modern Oak 114
Coal Size/Type: nut and pea
Location: Kent CT

Post By: franco b » Mon. Dec. 19, 2016 4:30 pm

Too thin a bed of burning coal will do that. Grate also must be fully covered with coal, otherwise air can bypass the coal.

Posts: 628
Joined: Sat. Jun. 25, 2011 4:30 pm
Hand Fed Coal Stove: Hitzer, 3095

Post By: Den034071 » Mon. Dec. 26, 2016 10:28 am

B under hand fired coal stoves pull up Basics Of a han fire coal stove .Scroll down to quick start video .The video will help you or pm me for help . jack

Post Reply

Return to “Imported Hand Fired Coal Stoves Using Anthracite”