Finished Product: 1896 Germer Parlor Stove

Post Reply
 
User avatar
FarmKid
New Member
Posts: 16
Joined: Thu. Mar. 31, 2011 10:03 am
Location: Midway between Buffalo, NY and Erie, PA - "Lake Effect" Country

Post by FarmKid » Sun. Oct. 30, 2011 10:10 am

Got the stove finished, chimney up and firing it daily just as cold weather hit. So far no bad experiences. Seems to work nicely with coal or wood, although length of wood is a limitation.

Attachments

1896Germer Antique Parlor Stove.jpg

Restored 1896 Germer and Family Room

.JPG | 26.9KB | 1896Germer Antique Parlor Stove.jpg

 
User avatar
Smoker858
Member
Posts: 212
Joined: Tue. Nov. 03, 2009 1:29 pm
Location: Parsippany, NJ
Hand Fed Coal Stove: Hitzer 50-93
Baseburners & Antiques: Reading Stove Works Penn circa 1900
Coal Size/Type: Nut
Other Heating: nat gas

Post by Smoker858 » Sun. Oct. 30, 2011 10:45 am

A real work of Art.

 
User avatar
SteveZee
Member
Posts: 2512
Joined: Wed. May. 11, 2011 10:45 am
Location: Downeast , Maine
Hand Fed Coal Stove: Glenwood Modern Oak 116 & Glenwood 208 C Range

Post by SteveZee » Sun. Oct. 30, 2011 12:33 pm

Beautiful stove. That baby will heat you up on a load of coal. I'm still amazed at the heat my Star Herald puts out and it's only a 10" firepot. It's fairly deep(14") though but still amazing amount of heat these cylinder stove produce.

 
User avatar
nortcan
Member
Posts: 3146
Joined: Sat. Feb. 20, 2010 3:32 pm
Location: Qc Canada

Post by nortcan » Sun. Oct. 30, 2011 6:14 pm

Bravo FarmKid. Nice restoration on that beautiful stove. And beautiful installation. You will love burning ant in that stove. Is it a base burner? And please, more photos...


 
User avatar
freetown fred
Member
Posts: 30300
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Sun. Oct. 30, 2011 7:40 pm

She came out real pretty & sounds functional my young friend. ;) I really like your hearth area :)
Last edited by freetown fred on Sun. Oct. 30, 2011 8:00 pm, edited 1 time in total.

 
User avatar
dlj
Member
Posts: 1273
Joined: Thu. Nov. 27, 2008 6:38 pm
Location: Monroe, NY
Hand Fed Coal Stove: Vermont Castings Resolute
Baseburners & Antiques: Glenwood Baseheater #6
Coal Size/Type: Stove coal
Other Heating: Oil Furnace, electric space heaters

Post by dlj » Sun. Oct. 30, 2011 7:45 pm

FarmKid wrote:Got the stove finished, chimney up and firing it daily just as cold weather hit. So far no bad experiences. Seems to work nicely with coal or wood, although length of wood is a limitation.
You can put the wood vertical inside that stove. It's harder to pack it that way, you really have to pick and choose your pieces, do a lot of jiggling around, but they will burn real nice that way once packed in well. Use your top door damper more for burning that way...

dj

 
buck24
Member
Posts: 379
Joined: Sun. Feb. 28, 2010 5:47 pm
Location: NEPA/Pittston Twp. PA
Hand Fed Coal Stove: New Buck Corp. / MODEL 24 COAL
Coal Size/Type: Pea, Nut / Anthracite

Post by buck24 » Sun. Oct. 30, 2011 7:46 pm

Great job. Really nice looking stove and install. You got her fired up just in time. Good luck with the new stove. Stay warm... and yes more pictures ;)

 
User avatar
wsherrick
Member
Posts: 3744
Joined: Wed. Jun. 18, 2008 6:04 am
Location: High In The Poconos
Hand Fed Coal Stove: Glenwood Base Heater, Crawford Base Heater
Baseburners & Antiques: Crawford Base Heater, Glenwood, Stanley Argand
Coal Size/Type: Chestnut, Stove Size

Post by wsherrick » Sun. Oct. 30, 2011 8:58 pm

I just love Germer stoves. They have an air of dignity and high quality. Germer's are one of my top 10 recommended stoves when people ask me what they should look for. You will have good success with coal. You can burn both Anthracite and Bituminous in it. Like dj says, stack the wood in it long ways.


 
User avatar
FarmKid
New Member
Posts: 16
Joined: Thu. Mar. 31, 2011 10:03 am
Location: Midway between Buffalo, NY and Erie, PA - "Lake Effect" Country

Post by FarmKid » Fri. Nov. 11, 2011 4:10 pm

Thanks for compliments & the advise on stacking.

 
User avatar
coalvet
Member
Posts: 254
Joined: Tue. Feb. 27, 2007 12:48 pm
Location: Rhode Island
Hand Fed Coal Stove: Crane Model 404, Harman MK I
Coal Size/Type: Nut
Other Heating: NG Boiler

Post by coalvet » Fri. Nov. 11, 2011 4:21 pm

Beautiful stove, have you fired her up with coal yet?

Rich

 
User avatar
grizzly2
Member
Posts: 844
Joined: Tue. Feb. 12, 2008 7:18 pm
Location: Whippleville, NY
Other Heating: Oil foilfurnace, Jotul#3 woodstove,electric base board.

Post by grizzly2 » Fri. Nov. 11, 2011 7:00 pm

Beutiful job on the old girl. If I needed a new coal stove I do believe I would go hunting for an anique like yours. :up:

 
User avatar
Freddy
Member
Posts: 7301
Joined: Fri. Apr. 11, 2008 2:54 pm
Location: Orrington, Maine
Stoker Coal Boiler: Axeman Anderson 130 (pea)
Coal Size/Type: Pea size, Superior, deep mined

Post by Freddy » Fri. Nov. 11, 2011 8:14 pm

What a beauty! Thanks for sharing.

 
User avatar
echos67
Member
Posts: 625
Joined: Tue. Feb. 22, 2011 7:26 am
Location: Maryland and Wanting Out !!

Post by echos67 » Fri. Nov. 11, 2011 8:21 pm

Great looking stove, whats the story behind it ?
Keith

Post Reply

Return to “Imported Hand Fired Coal Stoves Using Anthracite”