Page 1 of 1

combustioneer stove 77B Question on duct work

Posted: Mon. Nov. 04, 2019 12:20 pm
by christack
Looking at a combustioneer 77B stoker coal stove and my question is can you hook duct work to my duct work and how big of sq ft will it heat? Thanks

Re: combustioneer stove 77B Question on duct work

Posted: Mon. Nov. 04, 2019 5:21 pm
by McGiever
Welcome!
It is a 'space heater', and not a furnace.
You could connect ducts but you'd want a better blower, but not too big of blower either.

Do you have the manual and operator's guide?

Re: combustioneer stove 77B Question on duct work

Posted: Mon. Nov. 04, 2019 5:32 pm
by christack
Hello McGiever No manual or operators guide . Sorry new at this going to see if i can send a picture.download/file.php?mode=view&id=97924

Re: combustioneer stove 77B Question on duct work

Posted: Tue. Nov. 05, 2019 12:11 am
by McGiever
Here's the manual:
COMBUSTIONEER 77B Manual.pdf
.PDF | 5.4MB | COMBUSTIONEER 77B Manual.pdf

Re: combustioneer stove 77B Question on duct work

Posted: Tue. Nov. 05, 2019 6:09 pm
by carlherrnstein
Get it, you will not regret it. I paid $350 for mine, had to replace the timer motor in the control box($100), and fit a new convection fan($100), and a couple years back I had to replace the coal screw($200) I expect it will outlast me.

Just check that the hopper is not rotted out and that the gearbox is not seized.

Re: combustioneer stove 77B Question on duct work

Posted: Fri. Nov. 29, 2019 4:33 am
by Daniel-J
If you have problems even following the instructions, please contact the manufacturer or your supplier. Even if they can't answer your question, they can tell you where they can.