Page 1 of 1
combustioneer stove 77B Question on duct work
Posted: Mon. Nov. 04, 2019 12:20 pm
by christack
Looking at a combustioneer 77B stoker coal stove and my question is can you hook duct work to my duct work and how big of sq ft will it heat? Thanks
Re: combustioneer stove 77B Question on duct work
Posted: Mon. Nov. 04, 2019 5:21 pm
by McGiever
Welcome!
It is a 'space heater', and not a furnace.
You could connect ducts but you'd want a better blower, but not too big of blower either.
Do you have the manual and operator's guide?
Re: combustioneer stove 77B Question on duct work
Posted: Mon. Nov. 04, 2019 5:32 pm
by christack
Hello McGiever No manual or operators guide . Sorry new at this going to see if i can send a picture.
download/file.php?mode=view&id=97924
Re: combustioneer stove 77B Question on duct work
Posted: Tue. Nov. 05, 2019 12:11 am
by McGiever
Re: combustioneer stove 77B Question on duct work
Posted: Tue. Nov. 05, 2019 6:09 pm
by carlherrnstein
Get it, you will not regret it. I paid $350 for mine, had to replace the timer motor in the control box($100), and fit a new convection fan($100), and a couple years back I had to replace the coal screw($200) I expect it will outlast me.
Just check that the hopper is not rotted out and that the gearbox is not seized.
