Plaster on chimney

Post Reply
 
fig
Member
Posts: 403
Joined: Fri. Feb. 12, 2016 2:36 pm
Hand Fed Coal Stove: Round Oak 1917 Door model O-3, Florence No.77, Warm Morning 523-b
Hand Fed Coal Furnace: Hotblast 1357
Coal Size/Type: Bituminous stove coal
Other Heating: woodstock fireview, enviro omega

Post by fig » Sat. Oct. 26, 2019 9:10 pm

I’m planning on installing another WArm morning I picked up. It will be piped into a internal chimney that has plaster and paint on it. Do I need to remove this from the chimney? There is no lathe they just plastered directly on the brick. I plan on putting this pretty close to it.

 
User avatar
freetown fred
Member
Posts: 25164
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Sun. Oct. 27, 2019 8:38 am

Don't understand why you would think sooo????? BUT, I'd just leave it as is.

 
User avatar
carlherrnstein
Member
Posts: 995
Joined: Tue. Feb. 07, 2012 8:49 am
Location: Clarksburg, ohio
Hot Air Coal Stoker Stove: combustioneer model 77B
Coal Size/Type: pea stoker/Ohio bituminous

Post by carlherrnstein » Fri. Nov. 01, 2019 9:37 pm

Plaster wont burn however, wall paper can.

Advertise on Coalpail.com

 
fig
Member
Posts: 403
Joined: Fri. Feb. 12, 2016 2:36 pm
Hand Fed Coal Stove: Round Oak 1917 Door model O-3, Florence No.77, Warm Morning 523-b
Hand Fed Coal Furnace: Hotblast 1357
Coal Size/Type: Bituminous stove coal
Other Heating: woodstock fireview, enviro omega

Post by fig » Fri. Nov. 01, 2019 10:13 pm

Yeh think I’ll try a heat shield when I can be home and monitor it then see what happens. I have to get some coal first. Meant to stock up over the summer but kept putting it off. Too many irons in the fire.

 
Rob R.
Site Moderator
Posts: 14196
Joined: Fri. Dec. 28, 2007 4:26 pm
Location: Chazy, NY
Stoker Coal Boiler: EFM DF520
Hand Fed Coal Stove: Hitzer 50-93
Coal Size/Type: Lehigh Rice
Other Heating: Dad's 1953 EFM Highboy

Post by Rob R. » Sat. Nov. 02, 2019 11:40 am

If it is just painted plaster I would leave it alone.

Post Reply

Return to “Bituminous Coal Heating General Topics”