Condar bi-metallic dampner to Warm Morning 523

Post Reply
 
fig
Member
Posts: 1137
Joined: Fri. Feb. 12, 2016 2:36 pm
Hand Fed Coal Boiler: Harman SF360
Hand Fed Coal Stove: T.O.M (Warm Morning converted to baseburner by Steve) Round Oak 1917 Door model O-3, Warm Morning 400, Warm Morning 524, Warm Morning 414,Florence No.77, Warm Morning 523-b
Hand Fed Coal Furnace: Clayton 7.1/DS Machine basement stove/ Harman SF1500
Baseburners & Antiques: Renown Parlor stove 87B
Coal Size/Type: Bituminous/anthracite
Other Heating: Harman Accentra, enviro omega, Vermont Ironworks Elm stove, Quadrafire Mt Vernon, Logwood stove, Sotz barrel stove,

Post by fig » Thu. Mar. 07, 2019 10:11 pm

I have a Condar Universal
bi-metalic damper I would like to add to my Warm Morning 523 stove. Does anyone know where the bi-metallic damper is on the Warm Morning 400?

I'm thinking it would go on the ash door vent.

 
WoodyJohnson
New Member
Posts: 12
Joined: Wed. Mar. 06, 2019 10:12 am
Hand Fed Coal Stove: Warm morning 400
Baseburners & Antiques: Richmond#36 roundoak
Coal Size/Type: Nut anthracite, “house” bit
Other Heating: Propane

Post by WoodyJohnson » Fri. Mar. 08, 2019 7:35 am

Facing the stove, the auto damper is on the right side. The Bimetallic coil is mounted above the side door and has linkage that connects to the damper below the door. Mine is pretty much shot from age so I just crack the ash door damper when I need.


 
User avatar
freetown fred
Member
Posts: 30293
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Fri. Mar. 08, 2019 8:58 am

Rear right--facing stove--about 8" from bottom of stove--that's the way my HITZER is--can't imagine yours being much different.

Post Reply

Return to “Bituminous Coal Heating General Topics”