Condar bi-metallic dampner to Warm Morning 523

Post Reply
 
fig
Member
Posts: 403
Joined: Fri. Feb. 12, 2016 2:36 pm
Hand Fed Coal Stove: Round Oak 1917 Door model O-3, Florence No.77, Warm Morning 523-b
Hand Fed Coal Furnace: Hotblast 1357
Coal Size/Type: Bituminous stove coal
Other Heating: woodstock fireview, enviro omega

Post by fig » Thu. Mar. 07, 2019 10:11 pm

I have a Condar Universal
bi-metalic damper I would like to add to my Warm Morning 523 stove. Does anyone know where the bi-metallic damper is on the Warm Morning 400?

I'm thinking it would go on the ash door vent.

 
WoodyJohnson
New Member
Posts: 12
Joined: Wed. Mar. 06, 2019 10:12 am
Hand Fed Coal Stove: Warm morning 400
Baseburners & Antiques: Richmond#36 roundoak
Coal Size/Type: Nut anthracite, “house” bit
Other Heating: Propane

Post by WoodyJohnson » Fri. Mar. 08, 2019 7:35 am

Facing the stove, the auto damper is on the right side. The Bimetallic coil is mounted above the side door and has linkage that connects to the damper below the door. Mine is pretty much shot from age so I just crack the ash door damper when I need.

Advertise on Coalpail.com

 
User avatar
freetown fred
Member
Posts: 25164
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Fri. Mar. 08, 2019 8:58 am

Rear right--facing stove--about 8" from bottom of stove--that's the way my HITZER is--can't imagine yours being much different.

Post Reply

Return to “Bituminous Coal Heating General Topics”