Coal fire out
- davidmcbeth3
- Member
- Posts: 8505
- Joined: Sun. Jun. 14, 2009 2:31 pm
- Coal Size/Type: nut/pea/anthra
what's your current setpoint ? Its likely no one will answer with a recommendation without further information as to your current settings.
I imagine the issue is already fixed...I followed Napoleon's method here
I imagine the issue is already fixed...I followed Napoleon's method here
- StokerDon
- Site Moderator
- Posts: 7486
- Joined: Mon. Nov. 11, 2013 11:17 am
- Location: PA, Southern York County!
- Stoker Coal Boiler: Gentleman Janitor GJ-5, Van Wert VA-600, Axeman Anderson130 X3.
- Hand Fed Coal Furnace: Harman SF3500 reduced down to 3 grates connected to its own plenum
- Coal Size/Type: Rice, Chestnut and whatever will fit through the door on the Harman
- Other Heating: Noth'in but COAL! Well, Maybe a little tiny bit of wood
If you are loosing the fire due to warmer outside temps giving it more air will not help. I would increase the timer frequency and/or duration. This should put a little more heat into the chimney that will create a little more draft.
-Don
-Don