Help with my 90,000 btu

 
mule2701
Member
Posts: 20
Joined: Fri. Dec. 02, 2022 9:54 am
Stoker Coal Boiler: 90,000 btu

Post by mule2701 » Mon. Dec. 05, 2022 5:46 pm

Hello I would like to thank everyone that has helped me get my coal stove running right. You guys helped me more than a guy I paid 200 bucks to come out and look at my coal stove 2 weeks ago. The stove is running hot and really well. This is just 30 minutes after getting all fixed, my basement went from 54 degrees to 74 in just about an 1.5 hours so it’s definitely doing the job now. Thank you guys again I really appreciate it.

Attachments


 
User avatar
nepacoal
Member
Posts: 1696
Joined: Wed. Nov. 21, 2012 7:49 am
Location: Coal Country
Stoker Coal Boiler: Keystoker KAA-4 / "Kelly" and an EFM 520 at my in-laws
Hand Fed Coal Boiler: Harman SF-260 - retired
Coal Size/Type: Buck

Post by nepacoal » Mon. Dec. 05, 2022 6:25 pm

Glad you got it up and running... And thanks for coming back and reporting your success!


 
waytomany?s
Member
Posts: 3747
Joined: Fri. Aug. 16, 2019 3:02 pm
Location: Oneida, N.Y.
Hand Fed Coal Stove: Harmon Mark II
Hand Fed Coal Furnace: Looking
Baseburners & Antiques: Looking
Coal Size/Type: Nut
Other Heating: newmac wood/coal combo furnace

Post by waytomany?s » Mon. Dec. 05, 2022 7:01 pm

nepacoal wrote:
Mon. Dec. 05, 2022 6:25 pm
Glad you got it up and running... And thanks for coming back and reporting your success!
Posts like this helped me a lot when I started learning and researching. Plus one on the thanks for relaying confirmation of results.

Post Reply

Return to “Stoker Coal Boilers Using Anthracite (Hydronic & Steam)”