A few days ago I woke up to a broken auger. We have our EFM in-line with an oil boiler and a hot water heater..unfortunately, the indirect water heater is waiting on a warranty replacement and they are on back order. As a result, we had no hot water. Looking around it was suggested by a Coalpail member to contact Mark’s Supply. They had the auger and were willing to ship it. However, I took the 4 hour trip (5 with traffic) and they took their time to explain and help me with any issues or possible causes of the break. It may have been caused by the shear pin not breaking as I replaced one previously with a pin obtained locally.
Anyway, I obtained the part and hot water is up and running again within 24 hours. Mark’s Supply, Shenandoah, PA was very helpful and I learned they are a distributor for EFM. They also make parts for some discontinued machines for EFM.
Broken EFM520 Auger
- Hambden Bob
- Member
- Posts: 8549
- Joined: Mon. Jan. 04, 2010 10:54 am
- Location: Hambden Twp. Geauga County,Ohio
- Hot Air Coal Stoker Stove: Harman 1998 Magnum Stoker
- Hand Fed Coal Stove: Blower Model Coal Chubby 1982-Serial#0097
- Coal Size/Type: Rice-A-Roni ! / Nut
- Other Heating: Pro-Pain Forced Air
Wise Decision To Make That Trip!! Sounds like You picked up some Great Info through the "Old School Face To Face Technique"!! Thanx for Sharing it with Da' Rest Of Us!!