AA 130 motor shaft rotation direction?

Post Reply
 
gregolma1
New Member
Posts: 17
Joined: Thu. Jan. 14, 2021 6:02 pm

Post by gregolma1 » Sat. Jan. 16, 2021 1:51 pm

I just picked up a new motor for my AA130. I can't find any info on whether the motor should run clockwise or counter clockwise. I think the old one was CW.

 
User avatar
StokerDon
Site Moderator
Posts: 7486
Joined: Mon. Nov. 11, 2013 11:17 am
Location: PA, Southern York County!
Stoker Coal Boiler: Gentleman Janitor GJ-5, Van Wert VA-600, Axeman Anderson130 X3.
Hand Fed Coal Furnace: Harman SF3500 reduced down to 3 grates connected to its own plenum
Coal Size/Type: Rice, Chestnut and whatever will fit through the door on the Harman
Other Heating: Noth'in but COAL! Well, Maybe a little tiny bit of wood

Post by StokerDon » Sat. Jan. 16, 2021 7:14 pm

As you face the motor, it turns clockwise.

-Don


 
gregolma1
New Member
Posts: 17
Joined: Thu. Jan. 14, 2021 6:02 pm

Post by gregolma1 » Sat. Jan. 16, 2021 10:53 pm

Thanks. Less work needed.

Post Reply

Return to “Stoker Coal Boilers Using Anthracite (Hydronic & Steam)”