New to coal heating

Ckinsey · Post by **Ckinsey** » Sun. Feb. 16, 2020 4:12 pm

Yes Sir! I will do that

Ckinsey · Post by **Ckinsey** » Sat. Apr. 18, 2020 11:24 pm

I need of help. I'm pretty sure the auger is broken. Where can we get a new one???

Ckinsey · Post by **Ckinsey** » Sat. Apr. 18, 2020 11:27 pm

It's not moving in the coal barrel. But its moving at the motor.

freetown fred · Post by **freetown fred** » Sun. Apr. 19, 2020 6:25 am

Be patient C--be glad we're MORE or LESS at the end of the heating season!! LOL

nepacoal · Post by **nepacoal** » Sun. Apr. 19, 2020 6:40 am

You are pretty close to Mark's supply up in Shenandoah... But, you really need to figure out what actually broke before you buy anything. Hopefully it's just a shear pin, but you need to know for sure before you head to Mark's.

230 S. Main Street
Shenandoah, PA 17976
P: 570-462-0748

Post by **StokerDon** » Sun. Apr. 19, 2020 10:42 am

Ckinsey wrote: ↑
Sat. Apr. 18, 2020 11:24 pm
I need of help. I'm pretty sure the auger is broken. Where can we get a new one???

I just took a look at the original pictures that you posted. It looks like someone at some point replace the cotter pins and shear pin with nails. That's OK for the cotter pins but a nail where the shear pin should be is a No, No. That means the auger probably did break.

as others have suggested, I would call Marks Supply and or Steve Wilhiem. They should be able to help you out.

Here is a video about the drive pawl but we also show the shear pin and it's purpose.

-Don

freetown fred · Post by **freetown fred** » Sun. Apr. 19, 2020 11:07 am

C, the reason for the proper shear pin is that IT will break before the auger itself.

Ckinsey · Post by **Ckinsey** » Sun. Apr. 19, 2020 11:44 am

It's something else broken. :/

Post by **Rob R.** » Sun. Apr. 19, 2020 3:28 pm

Your auger is broken.

Ckinsey · Post by **Ckinsey** » Sun. Apr. 19, 2020 8:13 pm

Landlord is sending someone out tomorrow between 10-12 tomorrow

Ckinsey · Post by **Ckinsey** » Mon. Apr. 20, 2020 12:07 pm

In need of an augar for 8th

lzaharis · Post by **lzaharis** » Mon. Apr. 20, 2020 12:11 pm

Marks Supply in Shenandoah PA for an auger if you are close to them.

Ckinsey · Post by **Ckinsey** » Mon. Apr. 20, 2020 12:25 pm

He called. 250 for what they need. They need to talk to the landlord. Unsure what hes going to say. The handyman left to see about welding it.

ben · Post by **ben** » Mon. Apr. 20, 2020 12:33 pm

Don't forget. The thread is opposite when its connected to the bin pipe.
I changed mine out a few years ago. Not to difficult.

Ckinsey · Post by **Ckinsey** » Tue. Apr. 28, 2020 12:00 pm

Can any one give me a number for some one who works on them.

New to coal heating

Attachments