prox control coal gun
- plumberman
- Member
- Posts: 264
- Joined: Sun. Apr. 14, 2013 2:45 am
- Location: andes ny
- Stoker Coal Boiler: coal gun 130
- Coal Size/Type: pea
- Other Heating: solar dhw/samsung mini split/oil
Some info pics
- plumberman
- Member
- Posts: 264
- Joined: Sun. Apr. 14, 2013 2:45 am
- Location: andes ny
- Stoker Coal Boiler: coal gun 130
- Coal Size/Type: pea
- Other Heating: solar dhw/samsung mini split/oil
the capacitive sensor came from plastixs out of shrewsbury ma. the control cost 99 bucks, plus 28 for shipping. super nice folks to deal with! all wired 115volts a/c power. 1 relay activates multi function timer as a 1 shot option now set for 15 seconds. 2nd relay will turn off auger when sensor is satisfied. the one shot timer acts as a safety, if auger was to run past a reasonable time it will shut off i.e. broken belt/empty bin/defective sensor. the multi function timer is fully adjustable with a ton of options, the other 2 are rib [relay in a box] they are nice control voltage is wide open n/o and n/c contacts. they also make a double set of contacts in 1 control also. I have bein using the rib and same multi function relay on the ash auger for a few years now with no problems. once again thanks for the help on finding the right sensor!!!
- McGiever
- Member
- Posts: 10130
- Joined: Sun. May. 02, 2010 11:26 pm
- Location: Junction of PA-OH-WV
- Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
- Hand Fed Coal Boiler: BUCKET A DAY water heater
- Hand Fed Coal Stove: Warm Morning 414A
- Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
- Other Heating: Ground Source Heat Pump and some Solar
*plumberman*, would you happen to have a schematic or wiring diagram of the whole or parts of that setup you could link or post?