Efm s20 bearing bracket assembly

Post Reply
 
Adamdaley99
New Member
Posts: 6
Joined: Wed. Jan. 24, 2018 11:05 am
Stoker Coal Boiler: Efm 520

Post by Adamdaley99 » Tue. Feb. 05, 2019 11:22 am

Hello everyone tried searching through some old posts but couldn’t find anything. Does anyone know where i may be able to buy a bearing bracket assemply preferably a used one. Thanks for the info. I’m going to see if I can fix mine just trying to get ducks in a row if I can’t.

 
crazy4coal
Member
Posts: 540
Joined: Wed. Feb. 13, 2008 8:29 pm
Location: Sussex County N.J.

Post by crazy4coal » Tue. Feb. 05, 2019 1:17 pm

scrapper23jr E-mail him, If he does not have 1 he most likely knows where 1 is. Fill in your profile so we know about where you are. Maybe someone near you can help.

 
Adamdaley99
New Member
Posts: 6
Joined: Wed. Jan. 24, 2018 11:05 am
Stoker Coal Boiler: Efm 520

Post by Adamdaley99 » Tue. Feb. 05, 2019 4:55 pm

Thanks I sent scrapper an PM he and I don’t live far from another I live in Minersville PA. I added some more info to my profile

 
User avatar
StokerDon
Site Moderator
Posts: 7486
Joined: Mon. Nov. 11, 2013 11:17 am
Location: PA, Southern York County!
Stoker Coal Boiler: Gentleman Janitor GJ-5, Van Wert VA-600, Axeman Anderson130 X3.
Hand Fed Coal Furnace: Harman SF3500 reduced down to 3 grates connected to its own plenum
Coal Size/Type: Rice, Chestnut and whatever will fit through the door on the Harman
Other Heating: Noth'in but COAL! Well, Maybe a little tiny bit of wood

Post by StokerDon » Tue. Feb. 05, 2019 7:43 pm

Scrapper just posted a "Scrapper Sale" the other day.
parts
I sent him a PM but still havn't hear back. This time of year he's pretty busy so it may take a while to get a response.

What is a "bearing bracket assembly" anyway???

-Don


 
Adamdaley99
New Member
Posts: 6
Joined: Wed. Jan. 24, 2018 11:05 am
Stoker Coal Boiler: Efm 520

Post by Adamdaley99 » Wed. Feb. 06, 2019 6:52 pm

It’s number 29 in the picture

Attachments

88A8D297-1BED-42CD-B143-B082B7D3C82C.png
.PNG | 329.1KB | 88A8D297-1BED-42CD-B143-B082B7D3C82C.png

 
User avatar
StokerDon
Site Moderator
Posts: 7486
Joined: Mon. Nov. 11, 2013 11:17 am
Location: PA, Southern York County!
Stoker Coal Boiler: Gentleman Janitor GJ-5, Van Wert VA-600, Axeman Anderson130 X3.
Hand Fed Coal Furnace: Harman SF3500 reduced down to 3 grates connected to its own plenum
Coal Size/Type: Rice, Chestnut and whatever will fit through the door on the Harman
Other Heating: Noth'in but COAL! Well, Maybe a little tiny bit of wood

Post by StokerDon » Wed. Feb. 06, 2019 7:23 pm

Adamdaley99 wrote:
Wed. Feb. 06, 2019 6:52 pm
It’s number 29 in the picture
Thanks! Now I know what it is.

Just out of curiosity, how did you break that hunk of cast iron? If it's not broken, just worn, you just press the bushings out and press new ones in.

-Don

 
Adamdaley99
New Member
Posts: 6
Joined: Wed. Jan. 24, 2018 11:05 am
Stoker Coal Boiler: Efm 520

Post by Adamdaley99 » Wed. Feb. 06, 2019 7:49 pm

I was having an feeding issue last year and over tightened the nut on the end and cracked a big hunk off it was working fine for a while but now another piece let loose the bolt the holds the check pawl comes out

Post Reply

Return to “Stoker Coal Boilers Using Anthracite (Hydronic & Steam)”