Keystoker motor

Post Reply
 
Qtown1835
Member
Posts: 705
Joined: Sat. Nov. 08, 2014 11:47 am
Location: Quakertown, PA
Stoker Coal Boiler: Keystoker '81 KA4 (online 1/16/17)
Coal Size/Type: WAS Lehigh Rice (TBD)
Other Heating: EFM SPK600

Post by Qtown1835 » Thu. Oct. 11, 2018 8:15 am

I want to get a new motor for my keystoker. There is a 1/6hp 48n frame motor on it now. This is not a factory motor so i am curious what the factory puts on? Was thinking about going with a 1/4hp?

 
User avatar
Rob R.
Site Moderator
Posts: 17980
Joined: Fri. Dec. 28, 2007 4:26 pm
Location: Chazy, NY
Stoker Coal Boiler: EFM 520
Hand Fed Coal Stove: Chubby Jr

Post by Rob R. » Thu. Oct. 11, 2018 8:16 am

1/6hp sounds right to me. Call Keystoker to verify.


 
Qtown1835
Member
Posts: 705
Joined: Sat. Nov. 08, 2014 11:47 am
Location: Quakertown, PA
Stoker Coal Boiler: Keystoker '81 KA4 (online 1/16/17)
Coal Size/Type: WAS Lehigh Rice (TBD)
Other Heating: EFM SPK600

Post by Qtown1835 » Thu. Oct. 11, 2018 8:18 am

Rob R. wrote:
Thu. Oct. 11, 2018 8:16 am
1/6hp sounds right to me. Call Keystoker to verify.
I was being lazy that's why i asked here... :D

**EDIT**
Confirmed via Keystoker. K4= 1/6hp stoker motor.

Post Reply

Return to “Stoker Coal Boilers Using Anthracite (Hydronic & Steam)”