Soon to be EFM 520 owner

 
Pacowy
Member
Posts: 3555
Joined: Tue. Sep. 04, 2007 10:14 pm
Location: Dalton, MA
Stoker Coal Boiler: H.B. Smith 350 Mills boiler/EFM 85R stoker
Coal Size/Type: Buckwheat/anthracite

Post by Pacowy » Tue. May. 15, 2018 12:30 pm

You're welcome.

 
User avatar
Rob R.
Site Moderator
Posts: 17977
Joined: Fri. Dec. 28, 2007 4:26 pm
Location: Chazy, NY
Stoker Coal Boiler: EFM 520
Hand Fed Coal Stove: Chubby Jr

Post by Rob R. » Tue. May. 15, 2018 12:54 pm

DooHicky wrote:
Tue. May. 08, 2018 5:46 pm
After...yes the ring is a little bit taller..but that will not interfere with anything..I'm happy :-)
Nice job on the repair.

 
creek44
Member
Posts: 112
Joined: Tue. Aug. 23, 2011 12:20 pm
Location: Eastern Ohio
Stoker Coal Boiler: EFM 520
Coal Size/Type: Rice

Post by creek44 » Tue. May. 15, 2018 7:44 pm

I didn’t notice any mention regarding the condition of the pot bushing. Did you get a look at it? This would be a good time to replace it. Hopefully it was not run without one.


 
DooHicky
Member
Posts: 75
Joined: Thu. Feb. 22, 2018 7:59 pm

Post by DooHicky » Tue. May. 15, 2018 8:29 pm

Well.......I need to address that area also...why not...lol

 
DooHicky
Member
Posts: 75
Joined: Thu. Feb. 22, 2018 7:59 pm

Post by DooHicky » Tue. May. 15, 2018 8:32 pm

I do have a line on another complete blower/pot assembly with worm....that I'm going to look at...I like to have spare parts :-)

 
creek44
Member
Posts: 112
Joined: Tue. Aug. 23, 2011 12:20 pm
Location: Eastern Ohio
Stoker Coal Boiler: EFM 520
Coal Size/Type: Rice

Post by creek44 » Tue. May. 15, 2018 9:11 pm

That is an option worth considering. It is one of those things that is better to have and not need rather than need and not have.


 
DooHicky
Member
Posts: 75
Joined: Thu. Feb. 22, 2018 7:59 pm

Post by DooHicky » Fri. Jun. 01, 2018 2:29 pm

Well things might have changed up a little wee bit...found a DF520 right down the road from me....went to look at it...might be putting an offer in on it...sigh...lol

 
User avatar
freetown fred
Member
Posts: 30293
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Fri. Jun. 01, 2018 2:31 pm

Ya got the time D, just make the right choice for you!!

Post Reply

Return to “Stoker Coal Boilers Using Anthracite (Hydronic & Steam)”