Stoker Boiler Install - Ontario, Canada

lzaharis · Post by **lzaharis** » Wed. Apr. 25, 2018 5:11 pm

Hello Polarlight and fellow members,

About the rental and use of a one ton engine hoist:

I believe you mentioned it came in three parts; you could move each portion into place individually and you would have much better control over each load.

The engine hoist legs and the hoist beam itself can be extended forward before you pick the load up to move the three sections into place.

first: lift the ash pit on to the concrete half blocks, second: lift the pressure vessel on the ash pit and bolt it to the ash pit,
and third lift and mount the coal hopper on the boiler and bolt it into place.

What is the brand name of the coal stoker?

CapeCoaler · Post by **CapeCoaler** » Wed. Apr. 25, 2018 7:23 pm

Better yet barter or hire one with a talented operator...

PolarLight · Post by **PolarLight** » Thu. Apr. 26, 2018 3:31 pm

lzaharis wrote: ↑
Wed. Apr. 25, 2018 5:11 pm
Hello Polarlight and fellow members,

About the rental and use of a one ton engine hoist:

I believe you mentioned it came in three parts; you could move each portion into place individually and you would have much better control over each load.

The engine hoist legs and the hoist beam itself can be extended forward before you pick the load up to move the three sections into place.

first: lift the ash pit on to the concrete half blocks, second: lift the pressure vessel on the ash pit and bolt it to the ash pit,
and third lift and mount the coal hopper on the boiler and bolt it into place.

What is the brand name of the coal stoker?

Hello Azaharis,
Brand is unknown it has a size of cola vending mashine. And this is just only one part. Others are smaller and lighter. I will take more pictures when i get home. I am away from home now.

PolarLight · Post by **PolarLight** » Thu. Apr. 26, 2018 3:32 pm

CapeCoaler wrote: ↑
Wed. Apr. 25, 2018 7:23 pm
Better yet barter or hire one with a talented operator...

I do trucking for a living, before I used to work as a forklift operator.

PolarLight · Post by **PolarLight** » Thu. Apr. 26, 2018 3:35 pm

CapeCoaler wrote: ↑
Wed. Apr. 25, 2018 1:51 pm
Gantry crane...
You can build one out of wood with wheels...

I am thinking about building one. Crane is a very handy tool in a garage, moving my sleds would be an easy job

Post by **StokerDon** » Thu. Apr. 26, 2018 6:58 pm

This is my solution for moving boilers around.

.JPG | 362.3KB | IMG_1273.JPG

.JPG | 244.5KB | IMG_1274.JPG

Make sure the hoist and straps are rated for the weight of the boiler.

-Don

hotblast1357 · Post by **hotblast1357** » Thu. Apr. 26, 2018 7:22 pm

Also make sure the box of the truck is in very good shape!

PolarLight · Post by **PolarLight** » Tue. May. 08, 2018 6:25 pm

Here some pic of my beast. Its been pretty warm outside today

PolarLight · Post by **PolarLight** » Tue. May. 08, 2018 10:49 pm

Chimney assembly

PolarLight · Post by **PolarLight** » Wed. May. 09, 2018 8:54 pm

Sorry couldnt attach pic last time.

PolarLight · Post by **PolarLight** » Wed. May. 09, 2018 8:55 pm

Auger assembly

PolarLight · Post by **PolarLight** » Wed. May. 09, 2018 10:40 pm

Coal box, it sits on top of the auger box.

unhippy · Post by **unhippy** » Thu. May. 10, 2018 3:48 am

Is that picture of the auger assembly the intake end?

lzaharis · Post by **lzaharis** » Thu. May. 10, 2018 10:10 am

I believe it is Callum,

The hopper has a tapered base and bolts to the coal feeding assembly from what I remember.
The twin auger set up is used to move the coal to the pot burner with a second lower auger that also has right hand rotation.

I wish I could remember the brand name of the stoker, it is right in the front on the hopper!!!!!!!

McGiever · Post by **McGiever** » Thu. May. 10, 2018 10:41 am

lzaharis wrote: ↑
Thu. May. 10, 2018 10:10 am

I wish I could remember the brand name of the stoker, it is right in the front on the hopper!!!!!!!

Boiler was stated earlier to be a Buderus made in Germany, stoker is (maybe even boiler too) by Zota and may be from Russia.

Here is a Russian Supplier of a 40Kw:
https://kz.all.biz/en/solid-propellant-copper-of- ... v-g2809148

https://translate.google.com/translate?hl=en&sl=d ... rev=search

Stoker Boiler Install - Ontario, Canada

Attachments

Attachments

Attachments

Attachments