System flush
I have a read a few posts about folks who flush out their system to resolve issues.
I don't have any issues with my system. Should start flushing it out yearly. I open the drain once a week and let it run until its no longer a dark brown. I assume its just rust deposits from the pipes.
Its a EFM DF 520.
I don't have any issues with my system. Should start flushing it out yearly. I open the drain once a week and let it run until its no longer a dark brown. I assume its just rust deposits from the pipes.
Its a EFM DF 520.
- Lightning
- Site Moderator
- Posts: 14669
- Joined: Wed. Nov. 16, 2011 9:51 am
- Location: Olean, NY
- Stoker Coal Boiler: Modified AA 130
- Coal Size/Type: Pea Size - Anthracite
That might not be a good idea since letting fresh oxygen rich water into the system frequently could promote deterioration. Hopefully one of the boiler experts will chime in.
I figured if it's not broke then don't fix it, but I understand preventative maintenance can be good.
I guess I don;t wanna find out the whole top end rotted out just cause I didn't flush it or add chemicals or whatever.
I guess I don;t wanna find out the whole top end rotted out just cause I didn't flush it or add chemicals or whatever.
- Lightning
- Site Moderator
- Posts: 14669
- Joined: Wed. Nov. 16, 2011 9:51 am
- Location: Olean, NY
- Stoker Coal Boiler: Modified AA 130
- Coal Size/Type: Pea Size - Anthracite
I don't think you understood my post. Your weekly addition of fresh water may not be healthy but let one of the boiler experts chime in to confirm.
I mean, if you drain water out of the system weekly, doesn't fresh water need to come in to replace it?
Yes it does. It's a steam system so the water evaporates. There is a regulator that is supposed to do it automatically, but that broke. So I manually let water in as it drops below the halfway mark.
My question is specifically flushing the entire system.
My question is specifically flushing the entire system.
- Sting
- Member
- Posts: 2983
- Joined: Mon. Feb. 25, 2008 4:24 pm
- Location: Lower Fox Valley = Wisconsin
- Other Heating: OBSO Lennox Pulse "Air Scorcher" burning NG
Annual flushing of the mud legs on a steam boiler is common maintenance
http://parkerboiler.com/wp-content/uploads/2015/0 ... ctions.pdf
http://parkerboiler.com/wp-content/uploads/2015/0 ... ctions.pdf
- ShawnTRD
- Member
- Posts: 519
- Joined: Tue. Feb. 04, 2014 1:04 am
- Location: Spencer, NY
- Stoker Coal Boiler: Keystoker KA6 (New in April 2014)
- Coal Size/Type: Anthracite Rice
- Other Heating: Weil Mclain WGO-2 (Net 75k BTU)
Hey Sting,Sting wrote: ↑Fri. Nov. 24, 2017 4:15 pmAnnual flushing of the mud legs on a steam boiler is common maintenance
http://parkerboiler.com/wp-content/uploads/2015/0 ... ctions.pdf
On this topic is there anything that would auto add a anti-rust boiler additive when the boiler is adding water? That would also tell me is for some reason a lot of water is going into the boiler. How much fresh water should a pressure valve need to add to keep pressure? I'm guessing not much unless you have a leak.
- coaledsweat
- Site Moderator
- Posts: 13766
- Joined: Fri. Oct. 27, 2006 2:05 pm
- Location: Guilford, Connecticut
- Stoker Coal Boiler: Axeman Anderson 260M
- Coal Size/Type: Pea
Steam boilers add water by level, not pressure.
-
- Member
- Posts: 217
- Joined: Mon. Oct. 24, 2011 10:18 pm
- Location: vermont
- Stoker Coal Boiler: 1981 KA-6 Keystoker
- Hand Fed Coal Boiler: Tarms 504
- Hot Air Coal Stoker Stove: alaska liberty
- Hand Fed Coal Stove: jotul NR 507, crane coal cooker 44, crane 404, chubby w/blower, chubby w/out blower, franco blege 10-475 Montgomery ward laundry stove Moore's Brother seventeen circulator stove
- Coal Size/Type: nut/anthracite/pea
- Other Heating: harman p68, elmtree,harthstone,new mack
Good evening all I am not a plumber and not even close to being one but a have a friend that is. I asked him about flushing my oil boiler out every other year the reason I was asking him that is that is because I have a artesian well with a ton of minerals in the water it is so hard that I can only get about 6 months out of a DHW coil before it plugs up he told me, that the best thing to do is to leave it sealed and not let the oxygen into the system it seems to be working because I have had the boiler for about twenty years other then routine maintenance I have not had any trouble with it so far. He also told me that if you had a open system boiler ie. outdoor wood boiler that you had to test the water monthly and add a additive to it to keep the boiler from rusting out
Don't know if this helps it has work for me
Memco (Bill)
Don't know if this helps it has work for me
Memco (Bill)
- Sting
- Member
- Posts: 2983
- Joined: Mon. Feb. 25, 2008 4:24 pm
- Location: Lower Fox Valley = Wisconsin
- Other Heating: OBSO Lennox Pulse "Air Scorcher" burning NG
Akhemmmm
Hey Folks
The kind advice regarding what works in some guys hot water vessel is sort of USELESS when it comes to steam vessel maintenance
Shawn = maybe you will find this useful http://www.ioia.net/images/PDF/Boiler_additives_d ... tified.pdf
Sort of wordy but points you downstream and is more than i wish to key here
Best thing would be to find a steam boiler guy locally and adopt his chemical supplier after a water test.
Kind Regards
Sting
Hey Folks
The kind advice regarding what works in some guys hot water vessel is sort of USELESS when it comes to steam vessel maintenance
Shawn = maybe you will find this useful http://www.ioia.net/images/PDF/Boiler_additives_d ... tified.pdf
Sort of wordy but points you downstream and is more than i wish to key here
Best thing would be to find a steam boiler guy locally and adopt his chemical supplier after a water test.
Kind Regards
Sting
- coaledsweat
- Site Moderator
- Posts: 13766
- Joined: Fri. Oct. 27, 2006 2:05 pm
- Location: Guilford, Connecticut
- Stoker Coal Boiler: Axeman Anderson 260M
- Coal Size/Type: Pea
Hot water boilers don't need to be flushed. With steam boilers it is a must. Having witnessed the damage a layer of mud can do to a 250 horsepower boiler, I strongly recommend it. Catastrophic failure is the end result of steam boiler neglect.
-
- Member
- Posts: 217
- Joined: Mon. Oct. 24, 2011 10:18 pm
- Location: vermont
- Stoker Coal Boiler: 1981 KA-6 Keystoker
- Hand Fed Coal Boiler: Tarms 504
- Hot Air Coal Stoker Stove: alaska liberty
- Hand Fed Coal Stove: jotul NR 507, crane coal cooker 44, crane 404, chubby w/blower, chubby w/out blower, franco blege 10-475 Montgomery ward laundry stove Moore's Brother seventeen circulator stove
- Coal Size/Type: nut/anthracite/pea
- Other Heating: harman p68, elmtree,harthstone,new mack
My apologies Rockridge when I posted the post I did realize that it was a steam boiler that you were talking I did not read all the threads thoroughly enough sting and coaledsweat are right that was bad advise I need to be more careful before I jump in
Again I apologize
Memco
Again I apologize
Memco