Page 1 of 1
D520 Burnerplates
Posted: Tue. May. 06, 2008 9:31 am
by army5102
What is the easiest way to replace cracked burner plates
Re: D520 Burnerplates
Posted: Tue. May. 06, 2008 10:29 am
by stoker-man
Pictorial: Changing the Burner Plates
There is repair information on our section of this forum. For other information, view the pictorial articles in the efm section. it's the second listing from the top.
Re: D520 Burnerplates
Posted: Tue. May. 06, 2008 3:23 pm
by coal berner
army5102 wrote:What is the easiest way to replace cracked burner plates
Unscrew the top pot ring then take
the grate screw out lift the grates out replace all three gaskets there should be one under Pot ring one under the top of the grates and one at the bottom of the grates 3/8 for the top 1/2 for the bottom Rope gaskets check Pot bushing where the auger goes threw the Pot check Auger bushing & Auger flights for wear check chimney you should be good for the season