D520 Burnerplates
- stoker-man
- Verified Business Rep.
- Posts: 2071
- Joined: Mon. Nov. 19, 2007 9:33 pm
- Location: Lehigh Valley, PA
- Hand Fed Coal Boiler: 1981 efm wcb-24 in use 365 days a year
- Coal Size/Type: Anthracite/Chestnut
- Other Heating: Hearthstone wood stove
Pictorial: Changing the Burner Plates
There is repair information on our section of this forum. For other information, view the pictorial articles in the efm section. it's the second listing from the top.
There is repair information on our section of this forum. For other information, view the pictorial articles in the efm section. it's the second listing from the top.
- coal berner
- Member
- Posts: 3600
- Joined: Tue. Jan. 09, 2007 12:44 am
- Location: Pottsville PA. Schuylkill County PA. The Hart Of Anthracite Coal Country.
- Stoker Coal Boiler: 1986 Electric Furnace Man 520 DF
Unscrew the top pot ring then takearmy5102 wrote:What is the easiest way to replace cracked burner plates
the grate screw out lift the grates out replace all three gaskets there should be one under Pot ring one under the top of the grates and one at the bottom of the grates 3/8 for the top 1/2 for the bottom Rope gaskets check Pot bushing where the auger goes threw the Pot check Auger bushing & Auger flights for wear check chimney you should be good for the season