D520 Burnerplates

Post Reply
army5102
Member
Posts: 21
Joined: Sat. Mar. 22, 2008 11:35 am
Stove/Furnace Make: EFM coal stocker
Stove/Furnace Model: DF520

Post Tue. May. 06, 2008 9:31 am

What is the easiest way to replace cracked burner plates

User avatar
stoker-man
Verified Business Rep.
Posts: 2063
Joined: Mon. Nov. 19, 2007 9:33 pm
Hand Fed Coal Boiler: 1981 efm wcb-24 in use 365 days a year
Coal Size/Type: Anthracite/Chestnut
Other Heating: Hearthstone wood stove
Location: Lehigh Valley, PA

Post Tue. May. 06, 2008 10:29 am

Pictorial: Changing the Burner Plates

There is repair information on our section of this forum. For other information, view the pictorial articles in the efm section. it's the second listing from the top.

Visit Alternate Heating Sytems

User avatar
coal berner
Member
Posts: 3590
Joined: Tue. Jan. 09, 2007 12:44 am
Stoker Coal Boiler: 1986 Electric Furnace Man 520 DF
Stove/Furnace Make: Electric Furnace Man
Stove/Furnace Model: DF520
Location: Pottsville PA. Schuylkill County PA. The Hart Of Anthracite Coal Country.

Post Tue. May. 06, 2008 3:23 pm

army5102 wrote:What is the easiest way to replace cracked burner plates
Unscrew the top pot ring then take
the grate screw out lift the grates out replace all three gaskets there should be one under Pot ring one under the top of the grates and one at the bottom of the grates 3/8 for the top 1/2 for the bottom Rope gaskets check Pot bushing where the auger goes threw the Pot check Auger bushing & Auger flights for wear check chimney you should be good for the season

Post Reply

Return to “Stoker Coal Boilers Using Anthracite (Hydronic & Steam)”