Van Wert VA600 Rebuild
- StokerDon
- Site Moderator
- Posts: 7496
- Joined: Mon. Nov. 11, 2013 11:17 am
- Location: PA, Southern York County!
- Stoker Coal Boiler: Gentleman Janitor GJ-5, Van Wert VA-600, Axeman Anderson130 X3.
- Hand Fed Coal Furnace: Harman SF3500 reduced down to 3 grates connected to its own plenum
- Coal Size/Type: Rice, Chestnut and whatever will fit through the door on the Harman
- Other Heating: Noth'in but COAL! Well, Maybe a little tiny bit of wood
The DHW coil nuts may need a tweak once the boiler is cool. Things contract a bit when the temperature goes from 180* down to 65*. Clean the fly ash out of it so it doesn't rust up. Pull the stove pipe off, clean it and put it in a dry place. Cap the outlet and put a 40 watt light inside to keep it dry.
I don't know how difficult it would be on your setup but it might be a good idea to clean the coal out of the pot and feed pipes to keep them from corroding.
-Don
I don't know how difficult it would be on your setup but it might be a good idea to clean the coal out of the pot and feed pipes to keep them from corroding.
-Don
-
- Member
- Posts: 303
- Joined: Thu. Jan. 20, 2011 8:12 am
- Stoker Coal Boiler: Van Wert 600
- Hand Fed Coal Boiler: Tarm 202
- Hand Fed Coal Stove: Harman HXL, 150, Crane 88, Crane 404
- Other Heating: Solar
Thanks Don, great idea on the 40 w light bulb. I already got next years rice coal in the driveway. Rob
-
- Member
- Posts: 303
- Joined: Thu. Jan. 20, 2011 8:12 am
- Stoker Coal Boiler: Van Wert 600
- Hand Fed Coal Boiler: Tarm 202
- Hand Fed Coal Stove: Harman HXL, 150, Crane 88, Crane 404
- Other Heating: Solar
Saw this on a guys face book page, just met him and this went to the dump a year ago, ouch, I do not think it will do any good to tell him. There is another pic, the thing was mint.
Funny, mine was going to the dump as well, until it was saved.
Funny, mine was going to the dump as well, until it was saved.
Attachments
- StokerDon
- Site Moderator
- Posts: 7496
- Joined: Mon. Nov. 11, 2013 11:17 am
- Location: PA, Southern York County!
- Stoker Coal Boiler: Gentleman Janitor GJ-5, Van Wert VA-600, Axeman Anderson130 X3.
- Hand Fed Coal Furnace: Harman SF3500 reduced down to 3 grates connected to its own plenum
- Coal Size/Type: Rice, Chestnut and whatever will fit through the door on the Harman
- Other Heating: Noth'in but COAL! Well, Maybe a little tiny bit of wood
Wow, what the "F".
I guess the stoker went with it to. I hate when that happens!
-Don
I guess the stoker went with it to. I hate when that happens!
-Don
-
- Verified Business Rep.
- Posts: 742
- Joined: Thu. Sep. 29, 2016 1:02 pm
- Stoker Coal Boiler: Van Wert
- Hot Air Coal Stoker Stove: Alaska
- Hand Fed Coal Stove: Warm Morning
- Coal Size/Type: Rice,Buck, and Nut
I saw where you said you might burn rice, be careful with that as it shortens the life of the auger. Van Werts were designed for Buck and possibly even pea depending on sizing.
- StokerDon
- Site Moderator
- Posts: 7496
- Joined: Mon. Nov. 11, 2013 11:17 am
- Location: PA, Southern York County!
- Stoker Coal Boiler: Gentleman Janitor GJ-5, Van Wert VA-600, Axeman Anderson130 X3.
- Hand Fed Coal Furnace: Harman SF3500 reduced down to 3 grates connected to its own plenum
- Coal Size/Type: Rice, Chestnut and whatever will fit through the door on the Harman
- Other Heating: Noth'in but COAL! Well, Maybe a little tiny bit of wood
Thanks for that info Matt. I'm running a Van Wert stoker and buckwheat is not available down here. I found that it burns rice with no problems but I knew it was designed for buck. I didn't know it would ware the augers out quicker. I guess that goes for the pipes to.
I've been running it for a year strait. I guess at some point I will need to pull the augers and pipes to have a look at them.
-Don
I've been running it for a year strait. I guess at some point I will need to pull the augers and pipes to have a look at them.
-Don
-
- Verified Business Rep.
- Posts: 742
- Joined: Thu. Sep. 29, 2016 1:02 pm
- Stoker Coal Boiler: Van Wert
- Hot Air Coal Stoker Stove: Alaska
- Hand Fed Coal Stove: Warm Morning
- Coal Size/Type: Rice,Buck, and Nut
Yes the tube and auger is large therefore it carrys a lot of rice into the tube at a time and grinds it much more, If your auger gets sharp you will want to grind the sharp edge off, you can reach inside the pot and run your finger over the edge of the auger when you have down for cleaning as the pot auger generally wears the fastest. you can only grind it down so many times before replacing but it still helps you get the most for your dollar. If it gets worn too much a skilled welder can weld onto the old auger fins and grind down to recreate this is less expensive than buying new...StokerDon wrote:Thanks for that info Matt. I'm running a Van Wert stoker and buckwheat is not available down here. I found that it burns rice with no problems but I knew it was designed for buck. I didn't know it would ware the augers out quicker. I guess that goes for the pipes to.
I've been running it for a year strait. I guess at some point I will need to pull the augers and pipes to have a look at them.
-Don
-
- Member
- Posts: 303
- Joined: Thu. Jan. 20, 2011 8:12 am
- Stoker Coal Boiler: Van Wert 600
- Hand Fed Coal Boiler: Tarm 202
- Hand Fed Coal Stove: Harman HXL, 150, Crane 88, Crane 404
- Other Heating: Solar
Thanks Matt, I will check in May, burning 3 1/2 tons of rice a year now. and am a good welder. Welded the big auger as some one tried to cut it.LehighanthraciteMatt wrote:Yes the tube and auger is large therefore it carrys a lot of rice into the tube at a time and grinds it much more, If your auger gets sharp you will want to grind the sharp edge off, you can reach inside the pot and run your finger over the edge of the auger when you have down for cleaning as the pot auger generally wears the fastest. you can only grind it down so many times before replacing but it still helps you get the most for your dollar. If it gets worn too much a skilled welder can weld onto the old auger fins and grind down to recreate this is less expensive than buying new...StokerDon wrote:Thanks for that info Matt. I'm running a Van Wert stoker and buckwheat is not available down here. I found that it burns rice with no problems but I knew it was designed for buck. I didn't know it would ware the augers out quicker. I guess that goes for the pipes to.
I've been running it for a year strait. I guess at some point I will need to pull the augers and pipes to have a look at them.
-Don
-
- Member
- Posts: 303
- Joined: Thu. Jan. 20, 2011 8:12 am
- Stoker Coal Boiler: Van Wert 600
- Hand Fed Coal Boiler: Tarm 202
- Hand Fed Coal Stove: Harman HXL, 150, Crane 88, Crane 404
- Other Heating: Solar
Got myself a burn pot and partial drive auger blower assembly yesterday. The other guy got the whole VA600 plus all the goodies. He is new here and has not joined yet. So I thought I would wake this thread up, as he may need some help, and I am the closest one to him.