Page 1 of 1
Shear Pins
Posted: Tue. Jun. 10, 2014 7:48 pm
by Phil May
Does anyone have a source for shear pins for a 700. I checked the local stores and nothing.
Re: Shear Pins
Posted: Tue. Jun. 10, 2014 7:52 pm
by Rob R.
Any EFM dealer can get them, most have some in stock.
Re: Shear Pins
Posted: Tue. Jun. 10, 2014 8:12 pm
by Phil May
What are they grade #2 or someting special. I stuck a 16 penny nail in there and its been running for a couple days.
Re: Shear Pins
Posted: Tue. Jun. 10, 2014 8:33 pm
by Rob R.
The factory pins are a softer material than an average nail. you would be better off using a piece of brass stock than a nail. Talk to someone who has snapped an auger or broken something in the ratchet drive and they will agree.
Re: Shear Pins
Posted: Wed. Jun. 11, 2014 3:09 pm
by stoker-man
Mark's Supply in Shenandoah.
Re: Shear Pins
Posted: Tue. Jul. 15, 2014 4:16 pm
by Phil May
You got a phone #
Re: Shear Pins
Posted: Wed. Jul. 16, 2014 6:45 am
by ricoman2737
Phil,
Mark's Supply
230 South Main St.
Shenandoah, Pa. 17976
Telephone - 570-462-0748
Owner's Name is " Joe". A Great guy. World of knowledge in the coal business.
Good luck - John
Re: Shear Pins
Posted: Mon. Jul. 21, 2014 11:55 am
by Phil May
Marks Supply is the deal. Prompt and honest good place to do bussiness.