Flat Bed [KAA2] Vs Sloped Bed Stokers

 
User avatar
2001Sierra
Member
Posts: 2211
Joined: Wed. May. 20, 2009 8:09 am
Location: Wynantskill NY, 10 miles from Albany
Hot Air Coal Stoker Stove: Keystoker 90 Chimney vent
Coal Size/Type: Rice
Other Heating: Buderus Oil Boiler 3115-34

Post by 2001Sierra » Wed. Nov. 20, 2013 9:14 pm

dave brode wrote:All,

I believe that one could modify the stoker on the Kaa2 to makes the bed slope down 5 or so degrees. The mounting flage could be repositioned/rewelded, and the top opening cut so the hopper would still fit.

Yes, I have tinkeritis. Do I need help?

Dave
Dave step away from your stoker, the rest of us can get you through this :shock:
We can get you help if you need it, :cry:


 
User avatar
dave brode
Member
Posts: 478
Joined: Fri. Jan. 15, 2010 5:47 pm
Location: Frostburg, Maryland [western]
Stoker Coal Boiler: Keystoker KAA-2
Hand Fed Coal Boiler: used to have a 5 section Red Square
Coal Size/Type: rice anthracite

Post by dave brode » Wed. Nov. 20, 2013 10:10 pm

2001Sierra wrote:
dave brode wrote:All,

I believe that one could modify the stoker on the Kaa2 to makes the bed slope down 5 or so degrees. The mounting flage could be repositioned/rewelded, and the top opening cut so the hopper would still fit.

Yes, I have tinkeritis. Do I need help?

Dave
Dave step away from your stoker, the rest of us can get you through this :shock:
We can get you help if you need it, :cry:
Yea, yea. It's going to be cold this weekend, so maybe the urge will pass.

Hey, I have one of the bigger stoker units from a hot air furnace that someone let sit in the rain and was ruined. Maybe it'll fit? :roll:

Post Reply

Return to “Stoker Coal Boilers Using Anthracite (Hydronic & Steam)”